1968 Ford Ltd Recall |

1968 Ford Ltd Exterior Lighting,headlights,concealment Devices Recall | May 22, 1968

. Follwoing Is The Summary Of Corrective Actions Taken:
possibility That Two Springs In Vacuum Operated Headlamp Cover Systems Omitted In Production.these Springs Hold Headlamp Covers Open In Event Of A Major Loss Of Vacuum, Which Could Possibly Allow Covers To Close While Car Is In Motion.(correct By In- Stalling Springs Where Necessary.)

This recall was issued on May 22, 1968 for 1968 Ford Ltd, manufactured by FORD MOTOR COMPANY, in response to Exterior Lighting,headlights,concealment Devices problems.

1968 Ford Xl Recall |

1968 Ford Xl Exterior Lighting,headlights,concealment Devices Recall | May 22, 1968

. Follwoing Is The Summary Of Corrective Actions Taken:
possibility That Two Springs In Vacuum Operated Headlamp Cover Systems Omitted In Production.these Springs Hold Headlamp Covers Open In Event Of A Major Loss Of Vacuum, Which Could Possibly Allow Covers To Close While Car Is In Motion.(correct By In- Stalling Springs Where Necessary.)

This recall was issued on May 22, 1968 for 1968 Ford Xl, manufactured by FORD MOTOR COMPANY, in response to Exterior Lighting,headlights,concealment Devices problems.

1968 Ford Country Squire Recall |

1968 Ford Country Squire Exterior Lighting,headlights,concealment Devices Recall | May 22, 1968

. Follwoing Is The Summary Of Corrective Actions Taken:
possibility That Two Springs In Vacuum Operated Headlamp Cover Systems Omitted In Production.these Springs Hold Headlamp Covers Open In Event Of A Major Loss Of Vacuum, Which Could Possibly Allow Covers To Close While Car Is In Motion.(correct By In- Stalling Springs Where Necessary.)

This recall was issued on May 22, 1968 for 1968 Ford Country Squire, manufactured by FORD MOTOR COMPANY, in response to Exterior Lighting,headlights,concealment Devices problems.

1968 Ford E300 Recall |

1968 Ford E300 Steering,linkages,arm,idler And Attachment Recall | Apr 02, 1968

. Follwoing Is The Summary Of Corrective Actions Taken:
possible Failure Of Welds Used For Attaching Front Of Rear Spring Tounderside Of Body.failure Of These Welds Could Cause Loss Of Steering Control.also Possibility Of Excessive Play Developing In Steering System Idler Arm Support Bracket.(correct By Checking Welds And Installing New Hardware For Idler Arm.)

This recall was issued on Apr 02, 1968 for 1968 Ford E300, manufactured by FORD MOTOR COMPANY, in response to Steering,linkages,arm,idler And Attachment problems.

1968 Ford Econoline Recall |

1968 Ford Econoline Service Brakes, Hydraulic,foundation Components,hoses, Lines/piping, And Fittings Recall | Sept 30, 1968

. Follwoing Is The Summary Of Corrective Actions Taken:
possibility That Front Brake Hoses Installed Improperly, Allowing Hose To Contact Front Spring.if Hose Contacts Spring, Could Possibly Chafe And Cause Brake Failure.(correct By Inspection Of Hose Installation And Replace Where Necessary.)

This recall was issued on Sept 30, 1968 for 1968 Ford Econoline, manufactured by FORD MOTOR COMPANY, in response to Service Brakes, Hydraulic,foundation Components,hoses, Lines/piping, And Fittings problems.

1968 Ford Mustang Recall |

1968 Ford Mustang Visibility,defroster/defogger System,windshield,heater Core Recall | Oct 09, 1968

. Follwoing Is The Summary Of Corrective Actions Taken:
possibility Heater Inlet Hose Misrouted So That Hose Is Wedged Between Carburetor Fast Idle Lever And Intake Manifold.if Condition Exists Vehicle Could Become Difficult To Control.(correct By Routing Heater Hose Properly.)

This recall was issued on Oct 09, 1968 for 1968 Ford Mustang, manufactured by FORD MOTOR COMPANY, in response to Visibility,defroster/defogger System,windshield,heater Core problems.

1968 Ford B750 Recall |

1968 Ford B750 Steering Recall | Apr 02, 1968

. Follwoing Is The Summary Of Corrective Actions Taken:
possibility Failure Of Rivets Used For Attaching The Front Spring Rear Hanger Bracket To The Frame.rivet Failure Would Allow The Bracket To Separate From The Frame Imposing Severe Loads At The Front Bracket.should The Spring Disengage From The Front Bracket The Axle Will Shift And Loss Of Steering Control Could Result.also, There Is A Pos- Sibility Of Misassembly Or Mis-alignment Of Certain Components In The Power Steering System.failure To Correct This Condition, If Present, Also Could Result In Loss Of Steering Control.(correct By In- Stalling New Rivets And Power Steering Components If Necessary.)

This recall was issued on Apr 02, 1968 for 1968 Ford B750, manufactured by FORD MOTOR COMPANY, in response to Steering problems.

1968 Ford B500 Recall |

1968 Ford B500 Steering Recall | Apr 02, 1968

. Follwoing Is The Summary Of Corrective Actions Taken:
possibility Failure Of Rivets Used For Attaching The Front Spring Rear Hanger Bracket To The Frame.rivet Failure Would Allow The Bracket To Separate From The Frame Imposing Severe Loads At The Front Bracket.should The Spring Disengage From The Front Bracket The Axle Will Shift And Loss Of Steering Control Could Result.also, There Is A Pos- Sibility Of Misassembly Or Mis-alignment Of Certain Components In The Power Steering System.failure To Correct This Condition, If Present, Also Could Result In Loss Of Steering Control.(correct By In- Stalling New Rivets And Power Steering Components If Necessary.)

This recall was issued on Apr 02, 1968 for 1968 Ford B500, manufactured by FORD MOTOR COMPANY, in response to Steering problems.

1968 Ford F700 Recall |

1968 Ford F700 Steering Recall | Apr 02, 1968

. Follwoing Is The Summary Of Corrective Actions Taken:
possibility Failure Of Rivets Used For Attaching The Front Spring Rear Hanger Bracket To The Frame.rivet Failure Would Allow The Bracket To Separate From The Frame Imposing Severe Loads At The Front Bracket.should The Spring Disengage From The Front Bracket The Axle Will Shift And Loss Of Steering Control Could Result.also, There Is A Pos- Sibility Of Misassembly Or Mis-alignment Of Certain Components In The Power Steering System.failure To Correct This Condition, If Present, Also Could Result In Loss Of Steering Control.(correct By In- Stalling New Rivets And Power Steering Components If Necessary.)

This recall was issued on Apr 02, 1968 for 1968 Ford F700, manufactured by FORD MOTOR COMPANY, in response to Steering problems.

1968 Ford F750 Recall |

1968 Ford F750 Steering Recall | Apr 02, 1968

. Follwoing Is The Summary Of Corrective Actions Taken:
possibility Failure Of Rivets Used For Attaching The Front Spring Rear Hanger Bracket To The Frame.rivet Failure Would Allow The Bracket To Separate From The Frame Imposing Severe Loads At The Front Bracket.should The Spring Disengage From The Front Bracket The Axle Will Shift And Loss Of Steering Control Could Result.also, There Is A Pos- Sibility Of Misassembly Or Mis-alignment Of Certain Components In The Power Steering System.failure To Correct This Condition, If Present, Also Could Result In Loss Of Steering Control.(correct By In- Stalling New Rivets And Power Steering Components If Necessary.)

This recall was issued on Apr 02, 1968 for 1968 Ford F750, manufactured by FORD MOTOR COMPANY, in response to Steering problems.