1972 Ford Econoline Recall |

1972 Ford Econoline Service Brakes, Hydraulic,foundation Components,hoses, Lines/piping, And Fittings Recall | Nov 07, 1972

. Follwoing Is The Summary Of Corrective Actions Taken:
ford Campaign No H-5f.possibility That Front Brake Hose Lodged Between Frontsuspension Coil Spring During Assembly.condition Could Chafe Hose Andultimately Rupture, Resulting In Loss Of Front Wheel Brakes.(correct Byinspecting And Routing Properly, Installing New Hose Where Necessary.).

This recall was issued on Nov 07, 1972 for 1972 Ford Econoline, manufactured by FORD MOTOR COMPANY, in response to Service Brakes, Hydraulic,foundation Components,hoses, Lines/piping, And Fittings problems.

1972 Ford Bronco Recall |

1972 Ford Bronco Steering,hydraulic Power Assist System Recall | Oct 25, 1972

. Follwoing Is The Summary Of Corrective Actions Taken:
light Trucks.possibility That Power Steering System Was Inadvertently Filledwith Naptha Solvent.solvent Would Decompose Rubber Parts Such As Hoses Andpump And Gear Seals At Rapid Rate.naptha Solvent Has Lower Flash Point Thanpower Steering Fluid Which Could Present Fire Hazard.(correct By Inspectingdrain And Refill With Power Steering Fluid; Replace Hoses And Pump Assemblies.)

This recall was issued on Oct 25, 1972 for 1972 Ford Bronco, manufactured by FORD MOTOR COMPANY, in response to Steering,hydraulic Power Assist System problems.

1972 Ford Ranchero Recall |

1972 Ford Ranchero Fuel System, Gasoline,carburetor System Recall | Nov 08, 1972

. Follwoing Is The Summary Of Corrective Actions Taken:
ford Campaign No H-5c.equipped W/429-4v Engines.possibility That Carburetormay Leak Fuel From Around Power Valve Restrictor Plug.if Condition Exists,could Drain Fuel Bowl During Engine Shutdown And Result In Delayed Starting.there Is Also Possibility Of Fumes From Leaking Fuel Which Could Be Ignitedshould Spark Occur.(correct By Inspecting And Replacing Where Necessary.)

This recall was issued on Nov 08, 1972 for 1972 Ford Ranchero, manufactured by FORD MOTOR COMPANY, in response to Fuel System, Gasoline,carburetor System problems.

1972 Ford Ranch Wagon Recall |

1972 Ford Ranch Wagon Fuel System, Gasoline,carburetor System Recall | Nov 08, 1972

. Follwoing Is The Summary Of Corrective Actions Taken:
ford Campaign No H-5c.equipped W/429-4v Engines.possibility That Carburetormay Leak Fuel From Around Power Valve Restrictor Plug.if Condition Exists,could Drain Fuel Bowl During Engine Shutdown And Result In Delayed Starting.there Is Also Possibility Of Fumes From Leaking Fuel Which Could Be Ignitedshould Spark Occur.(correct By Inspecting And Replacing Where Necessary.)

This recall was issued on Nov 08, 1972 for 1972 Ford Ranch Wagon, manufactured by FORD MOTOR COMPANY, in response to Fuel System, Gasoline,carburetor System problems.

1972 Ford G100 Recall |

1972 Ford G100 Steering,wheel And Handle Bar Recall | Apr 03, 1972

. Follwoing Is The Summary Of Corrective Actions Taken:
ford Campaign No H-2c.1/2-ton Postal Service Truck.possibility Thatvehicles Were Built With Misaligned Steering Shafts.if Condition Exists Lowerbearing May Be Susceptible To Fracturing, Causing Steering Shaft To Break Andresulting In Loss Of Steering Control.(correct By Inspecting And Aligningproperly And Replacing Parts If Necessary.)

This recall was issued on Apr 03, 1972 for 1972 Ford G100, manufactured by FORD MOTOR COMPANY, in response to Steering,wheel And Handle Bar problems.

1972 Ford F350 Recall |

1972 Ford F350 Suspension,front,wheel Bearing Recall | Aug 24, 1972

. Follwoing Is The Summary Of Corrective Actions Taken:
ford Truck Campaign No H/o-4c.4×2 Trucks.possibility That Vehicles Wereassembled With Over-tightened Front Wheel Bearing Nut.incorrect Torquingprocedure Could Preload Wheel Bearings, Causing Them To Seize On Spindle Stem.spindle Stem Could Break, Allowing Wheel To Disengage Without Warning.(correct By Inspecting And Replaceing Bearing And Spindle Where Necessary.)

This recall was issued on Aug 24, 1972 for 1972 Ford F350, manufactured by FORD MOTOR COMPANY, in response to Suspension,front,wheel Bearing problems.

1972 Ford F250 Recall |

1972 Ford F250 Suspension,front,wheel Bearing Recall | Aug 24, 1972

. Follwoing Is The Summary Of Corrective Actions Taken:
ford Truck Campaign No H/o-4c.4×2 Trucks.possibility That Vehicles Wereassembled With Over-tightened Front Wheel Bearing Nut.incorrect Torquingprocedure Could Preload Wheel Bearings, Causing Them To Seize On Spindle Stem.spindle Stem Could Break, Allowing Wheel To Disengage Without Warning.(correct By Inspecting And Replaceing Bearing And Spindle Where Necessary.)

This recall was issued on Aug 24, 1972 for 1972 Ford F250, manufactured by FORD MOTOR COMPANY, in response to Suspension,front,wheel Bearing problems.

1972 Ford F100 Recall |

1972 Ford F100 Suspension,front,wheel Bearing Recall | Aug 24, 1972

. Follwoing Is The Summary Of Corrective Actions Taken:
ford Truck Campaign No H/o-4c.4×2 Trucks.possibility That Vehicles Wereassembled With Over-tightened Front Wheel Bearing Nut.incorrect Torquingprocedure Could Preload Wheel Bearings, Causing Them To Seize On Spindle Stem.spindle Stem Could Break, Allowing Wheel To Disengage Without Warning.(correct By Inspecting And Replaceing Bearing And Spindle Where Necessary.)

This recall was issued on Aug 24, 1972 for 1972 Ford F100, manufactured by FORD MOTOR COMPANY, in response to Suspension,front,wheel Bearing problems.

1972 Ford Ltd Recall |

1972 Ford Ltd Steering,wheel And Handle Bar Recall | Feb 28, 1972

. Follwoing Is The Summary Of Corrective Actions Taken:
ford Campaign No H-2a.possibility That 5/8 – 18 Unf Freerunning Hex Nut Wasinadvertently Used In Place Of Specified 5/8 – 18 Unf Torque Hex Lock Nut Toattach Steering Wheel To Steering Column.if Condition Exists, Nut May Loosencausing Steering Wheel To Become Disengaged From Column Resulting In Loss Ofsteering Control.(correct By Inspecting And Installing Proper Nutwherenecessary.)

This recall was issued on Feb 28, 1972 for 1972 Ford Ltd, manufactured by FORD MOTOR COMPANY, in response to Steering,wheel And Handle Bar problems.

1972 Ford B7000 Recall |

1972 Ford B7000 Parking Brake,driveline,hydraulic,hoses, Lines/piping, And Fittings Recall | Dec 27, 1972

. Follwoing Is The Summary Of Corrective Actions Taken:
ford Campaign No H6e.bus Chassis.possibility That Parking Brake Systemplastic Air Brake Tube May Have Been Improperly Routed In Area Of Exhaust Tailpipe At Rear Crossmember Of Frame.if Condition Exists, Could Cause Tube Tomelt, Resulting In Automatic And Unexpected Loss Of Air Pressure And Rear Brakeapplication.(correct By Inspecting And Rerouting Brake Tube).

This recall was issued on Dec 27, 1972 for 1972 Ford B7000, manufactured by FORD MOTOR COMPANY, in response to Parking Brake,driveline,hydraulic,hoses, Lines/piping, And Fittings problems.