1975 Ford Lnt880 Recall |

1975 Ford Lnt880 Power Train,axle Assembly,banjo Housing Recall | Aug 05, 1975

. Follwoing Is The Summary Of Corrective Actions Taken:
ford Campaign No 166.heavy Duty Trucks.built Jan.29, 1973 Thru June 3,1975.possibility That Tandem Rear Housing Wall Thickness At Journal Radiusadjacent To Spindle Friction Weld Joint May Not Be Sufficient To Insure Fatiguelife Equivalent To Expected Mileage Life Of Vehicle.housing Failure Canresult In Dual Wheel Assembly Becoming Disengaged From Vehicle, Resulting Inhazard To Other Traffic.this Campaign Supersedes Campaign 74-0241, Dateddecember 6, 1974.(correct By Inspecting And Replacing With Housing Ofincreased Wall Thickness Design).

This recall was issued on Aug 05, 1975 for 1975 Ford Lnt880, manufactured by FORD MOTOR COMPANY, in response to Power Train,axle Assembly,banjo Housing problems.

1975 Ford Lt880 Recall |

1975 Ford Lt880 Power Train,axle Assembly,banjo Housing Recall | Aug 05, 1975

. Follwoing Is The Summary Of Corrective Actions Taken:
ford Campaign No 166.heavy Duty Trucks.built Jan.29, 1973 Thru June 3,1975.possibility That Tandem Rear Housing Wall Thickness At Journal Radiusadjacent To Spindle Friction Weld Joint May Not Be Sufficient To Insure Fatiguelife Equivalent To Expected Mileage Life Of Vehicle.housing Failure Canresult In Dual Wheel Assembly Becoming Disengaged From Vehicle, Resulting Inhazard To Other Traffic.this Campaign Supersedes Campaign 74-0241, Dateddecember 6, 1974.(correct By Inspecting And Replacing With Housing Ofincreased Wall Thickness Design).

This recall was issued on Aug 05, 1975 for 1975 Ford Lt880, manufactured by FORD MOTOR COMPANY, in response to Power Train,axle Assembly,banjo Housing problems.

1975 Ford Lts9000 Recall |

1975 Ford Lts9000 Power Train,axle Assembly,banjo Housing Recall | Aug 05, 1975

. Follwoing Is The Summary Of Corrective Actions Taken:
ford Campaign No 166.heavy Duty Trucks.built Jan.29, 1973 Thru June 3,1975.possibility That Tandem Rear Housing Wall Thickness At Journal Radiusadjacent To Spindle Friction Weld Joint May Not Be Sufficient To Insure Fatiguelife Equivalent To Expected Mileage Life Of Vehicle.housing Failure Canresult In Dual Wheel Assembly Becoming Disengaged From Vehicle, Resulting Inhazard To Other Traffic.this Campaign Supersedes Campaign 74-0241, Dateddecember 6, 1974.(correct By Inspecting And Replacing With Housing Ofincreased Wall Thickness Design).

This recall was issued on Aug 05, 1975 for 1975 Ford Lts9000, manufactured by FORD MOTOR COMPANY, in response to Power Train,axle Assembly,banjo Housing problems.

1975 Ford Lts8000 Recall |

1975 Ford Lts8000 Power Train,axle Assembly,banjo Housing Recall | Aug 05, 1975

. Follwoing Is The Summary Of Corrective Actions Taken:
ford Campaign No 166.heavy Duty Trucks.built Jan.29, 1973 Thru June 3,1975.possibility That Tandem Rear Housing Wall Thickness At Journal Radiusadjacent To Spindle Friction Weld Joint May Not Be Sufficient To Insure Fatiguelife Equivalent To Expected Mileage Life Of Vehicle.housing Failure Canresult In Dual Wheel Assembly Becoming Disengaged From Vehicle, Resulting Inhazard To Other Traffic.this Campaign Supersedes Campaign 74-0241, Dateddecember 6, 1974.(correct By Inspecting And Replacing With Housing Ofincreased Wall Thickness Design).

This recall was issued on Aug 05, 1975 for 1975 Ford Lts8000, manufactured by FORD MOTOR COMPANY, in response to Power Train,axle Assembly,banjo Housing problems.

1975 Ford Granada Recall |

1975 Ford Granada Suspension Recall | Oct 01, 1975

. Follwoing Is The Summary Of Corrective Actions Taken:
ford Campaign No 172.possibility That Vehicles Were Built With 1975 Modelright Handfront Suspension Struts.the 1975 Model Struts When Used Incombination With The 1976 Insulator, Could Result In Reduced Strut Fatiguelife.should Strut Fracture Occur, It May Be Accompanied By An Unusualmetallic Noise In Front End Of Vehicle And A Consistent Ritht-hand Steeringwheel Pull, Which Could Adversely Affect Vehicle Controllability.(correct Byinspecting And Replacing With Proper Model Strut).

This recall was issued on Oct 01, 1975 for 1975 Ford Granada, manufactured by FORD MOTOR COMPANY, in response to Suspension problems.

1975 Ford Lts800 Recall |

1975 Ford Lts800 Power Train,automatic Transmission Recall | May 05, 1975

. Follwoing Is The Summary Of Corrective Actions Taken:
ford Campaign No 157.heavy Duty Trucks.possibility That Vehicles Equippedwith Mt-650 Automatic Transmission May Contain Nylon Particles Contaminantwithin The Transmission Governor Assembly.a Nylon Particle Could Block Anorifice In The Governor Valve And Result In Unintentional Transmissiondownshift With The Possibility Of Transmission Disintergration.(correct Byinspecting And Replacing Governor Assembly Where Necessary).

This recall was issued on May 05, 1975 for 1975 Ford Lts800, manufactured by FORD MOTOR COMPANY, in response to Power Train,automatic Transmission problems.

1975 Ford Lts900 Recall |

1975 Ford Lts900 Power Train,automatic Transmission Recall | May 05, 1975

. Follwoing Is The Summary Of Corrective Actions Taken:
ford Campaign No 157.heavy Duty Trucks.possibility That Vehicles Equippedwith Mt-650 Automatic Transmission May Contain Nylon Particles Contaminantwithin The Transmission Governor Assembly.a Nylon Particle Could Block Anorifice In The Governor Valve And Result In Unintentional Transmissiondownshift With The Possibility Of Transmission Disintergration.(correct Byinspecting And Replacing Governor Assembly Where Necessary).

This recall was issued on May 05, 1975 for 1975 Ford Lts900, manufactured by FORD MOTOR COMPANY, in response to Power Train,automatic Transmission problems.

1975 Ford F500 Recall |

1975 Ford F500 Service Brakes, Hydraulic,pedals And Linkages Recall | May 12, 1975

. Follwoing Is The Summary Of Corrective Actions Taken:
ford Campaign No 158.trucks And Truck Chassis Cabs, Bus Chassis Equipped Withhydraulic Brakes.possibility That The Hydraulic Brakes May Have Beenassembled With Brake Pedal Push Rod Pins Made From An Incorrect Steel.weldingof Such Push Rod Pins To The Brake Pedal Assembly Causes The Area Adjacent Tothe Weld To Become Brittle And May Result In Pin Fracture And Separation Duringa High Pedal Effort Stop.should This Occur, The Service Brakes Could Not Beapplied.(correct By Inspecting And Installing Pins Made Of Correct Steelwhere Necessary).

This recall was issued on May 12, 1975 for 1975 Ford F500, manufactured by FORD MOTOR COMPANY, in response to Service Brakes, Hydraulic,pedals And Linkages problems.

1975 Ford B750 Recall |

1975 Ford B750 Service Brakes, Hydraulic,pedals And Linkages Recall | May 12, 1975

. Follwoing Is The Summary Of Corrective Actions Taken:
ford Campaign No 158.trucks And Truck Chassis Cabs, Bus Chassis Equipped Withhydraulic Brakes.possibility That The Hydraulic Brakes May Have Beenassembled With Brake Pedal Push Rod Pins Made From An Incorrect Steel.weldingof Such Push Rod Pins To The Brake Pedal Assembly Causes The Area Adjacent Tothe Weld To Become Brittle And May Result In Pin Fracture And Separation Duringa High Pedal Effort Stop.should This Occur, The Service Brakes Could Not Beapplied.(correct By Inspecting And Installing Pins Made Of Correct Steelwhere Necessary).

This recall was issued on May 12, 1975 for 1975 Ford B750, manufactured by FORD MOTOR COMPANY, in response to Service Brakes, Hydraulic,pedals And Linkages problems.

1975 Ford B700 Recall |

1975 Ford B700 Service Brakes, Hydraulic,pedals And Linkages Recall | May 12, 1975

. Follwoing Is The Summary Of Corrective Actions Taken:
ford Campaign No 158.trucks And Truck Chassis Cabs, Bus Chassis Equipped Withhydraulic Brakes.possibility That The Hydraulic Brakes May Have Beenassembled With Brake Pedal Push Rod Pins Made From An Incorrect Steel.weldingof Such Push Rod Pins To The Brake Pedal Assembly Causes The Area Adjacent Tothe Weld To Become Brittle And May Result In Pin Fracture And Separation Duringa High Pedal Effort Stop.should This Occur, The Service Brakes Could Not Beapplied.(correct By Inspecting And Installing Pins Made Of Correct Steelwhere Necessary).

This recall was issued on May 12, 1975 for 1975 Ford B700, manufactured by FORD MOTOR COMPANY, in response to Service Brakes, Hydraulic,pedals And Linkages problems.