1979 Ford E150 Recall | The Wheel Assembly May Contain Substandard Welds In The Area Where The Disc Is Attached To The Rim. As A Result, Cracks Can Form In The Wheel Assembly, Causing Air Loss And

1979 Ford E150 Wheels Recall | Aug 07, 1979

The Wheel Assembly May Contain Substandard Welds In The Area Where The Disc Is Attached To The Rim. As A Result, Cracks Can Form In The Wheel Assembly, Causing Air Loss And An Underinflated Tire.. Follwoing Is The Summary Of Corrective Actions Taken: Dealer Will Inspect And Replace Any Defective Wheels Without Charge To Owner.
vehicle Description: Light Trucks Equipped With 15 X 5.5k Wheel Assemblies.system: Wheels; Wheel Assembly.consequences Of Defect: Low Tire Inflation Pressures Could Cause Loss Ofvehicle Control And An Accident. Also, If The Spot Welds Fail, The Rim And Tirecould Separate From The Wheel Disc, With Consequent Loss Of Control Andaccident.

This recall was issued on Aug 07, 1979 for 1979 Ford E150, manufactured by FORD MOTOR COMPANY, in response to Wheels problems.

1979 Ford E150 Recall | Certain Vehicles May Not Contain The Specified Body Mounted Heat Shields. This Could Cause High Floor Pan Temperatures When The Engine Is Idled For Extended Periods Of Time. Fouled Spark Plugs Or Other

1979 Ford E150 Structure, Frame And Members,underbody Shields Recall | June 19, 1979

Certain Vehicles May Not Contain The Specified Body Mounted Heat Shields. This Could Cause High Floor Pan Temperatures When The Engine Is Idled For Extended Periods Of Time. Fouled Spark Plugs Or Other Engine Conditions Could Further Increase Exhaust Temperatures.. Follwoing Is The Summary Of Corrective Actions Taken: The Dealer Will Install The Necessary Frame Mounted Heat Shield, If Missing.
vehicle Description: Trucks Equipped With 300 And 460 Cid Engines.system: Exhaust; Body Mounted Heat Shields.consequences Of Defect: These High Temperatures Could Cause The Rear Floorcoverings To Smoulder, Resulting In Smoke Damage And Personal Injury.

This recall was issued on June 19, 1979 for 1979 Ford E150, manufactured by FORD MOTOR COMPANY, in response to Structure, Frame And Members,underbody Shields problems.

1979 Ford E150 Recall | The Involved Vehicles Were Produced With Brake Push-rod To Brake Pedal Retaining Pins Which Were Not Heat-treated As Specified. This Could Allow The Brake Pedal To Become Disengaged From The Push-rod.

1979 Ford E150 Service Brakes, Hydraulic,pedals And Linkages Recall | May 15, 1979

The Involved Vehicles Were Produced With Brake Push-rod To Brake Pedal Retaining Pins Which Were Not Heat-treated As Specified. This Could Allow The Brake Pedal To Become Disengaged From The Push-rod.. Follwoing Is The Summary Of Corrective Actions Taken: Dealer Will Replace The Suspect Brake Retaining Pin.
vehicle Description: Passenger Vehicles.system: Service Brakes; Hydraulic Linkage, Pedal.consequences Of Defect: Disengagement Of The Brake Pedal Would Result In Totalloss Of Service Brakes, Which Could Lead To Loss Of Vehicle Control And Anaccident.note: The Parking Brake Will Remain Operational Even If Service Brakes Arelost.

This recall was issued on May 15, 1979 for 1979 Ford E150, manufactured by FORD MOTOR COMPANY, in response to Service Brakes, Hydraulic,pedals And Linkages problems.