1979 Ford Granada Recall | Windshields May Have Been Installed On These Vehicles Without The Application Of A Butyl Primer On The Mounting Surface Of The Glazing. The Primer Is Required To Ensure Adequate Retention Of The Windshield To

1979 Ford Granada Visibility,windshield Recall | Dec 27, 1979

Windshields May Have Been Installed On These Vehicles Without The Application Of A Butyl Primer On The Mounting Surface Of The Glazing. The Primer Is Required To Ensure Adequate Retention Of The Windshield To Its Opening Flange. This Constitutes A Non-compliance With Federal Motor Vehicle Safety Standard No. 212, “windshield Mounting”.. Follwoing Is The Summary Of Corrective Actions Taken: Dealer Will Reinstall The Windshield Correctly Without Charge To Owner.
vehicle Description: Passenger Vehicles.system: Visual; Windshield Retention.consequences Of Defect: In The Event Of An Accident, The Windshield May Becomedisplaced And The Chances Of Passenger Injury Would Be Increased.

This recall was issued on Dec 27, 1979 for 1979 Ford Granada, manufactured by FORD MOTOR COMPANY, in response to Visibility,windshield problems.

1979 Ford Fairmont Recall | Windshields May Have Been Installed On These Vehicles Without The Application Of A Butyl Primer On The Mounting Surface Of The Glazing. The Primer Is Required To Ensure Adequate Retention Of The Windshield To

1979 Ford Fairmont Visibility,windshield Recall | Dec 27, 1979

Windshields May Have Been Installed On These Vehicles Without The Application Of A Butyl Primer On The Mounting Surface Of The Glazing. The Primer Is Required To Ensure Adequate Retention Of The Windshield To Its Opening Flange. This Constitutes A Non-compliance With Federal Motor Vehicle Safety Standard No. 212, “windshield Mounting”.. Follwoing Is The Summary Of Corrective Actions Taken: Dealer Will Reinstall The Windshield Correctly Without Charge To Owner.
vehicle Description: Passenger Vehicles.system: Visual; Windshield Retention.consequences Of Defect: In The Event Of An Accident, The Windshield May Becomedisplaced And The Chances Of Passenger Injury Would Be Increased.

This recall was issued on Dec 27, 1979 for 1979 Ford Fairmont, manufactured by FORD MOTOR COMPANY, in response to Visibility,windshield problems.

1979 Ford Pinto Recall | Some Of The Involved Vehicles Do Not Have The Hair Pin Clip Used To Retain The Pushrod To The Brake Pedal Pushrod Pin Installed. If This Clip Is Missing, The Pushrod May Become

1979 Ford Pinto Service Brakes, Hydraulic,pedals And Linkages Recall | Jan 09, 1979

Some Of The Involved Vehicles Do Not Have The Hair Pin Clip Used To Retain The Pushrod To The Brake Pedal Pushrod Pin Installed. If This Clip Is Missing, The Pushrod May Become Disengaged From The Brake Pedal Pushrod Pin.. Follwoing Is The Summary Of Corrective Actions Taken: Dealers Will Inspect Vehicles For The Presence Of This Hair Pin Clip And, If Necessary, Any Missing Parts Will Be Installed At No Cost To Owner.
vehicle Description: Passenger Vehicles.system: Service Brakes; Brake Pedal Pushrod.consequences Of Defect: Such Disengagement Can Result In A Loss Of Brakingcapability That Could Lead To A Vehicle Accident.

This recall was issued on Jan 09, 1979 for 1979 Ford Pinto, manufactured by FORD MOTOR COMPANY, in response to Service Brakes, Hydraulic,pedals And Linkages problems.

1979 Ford Ltd Ii Recall | The Involved Vehicles May Have Been Built With Incorrect Weld Nuts That Attach The Rear Portion Of The Front Outboard Seat Track To The Floor Pan. The Incorrect Nuts Have An Oversize Diameter And

1979 Ford Ltd Ii Seats,mid/rear Assembly Recall | Jan 09, 1979

The Involved Vehicles May Have Been Built With Incorrect Weld Nuts That Attach The Rear Portion Of The Front Outboard Seat Track To The Floor Pan. The Incorrect Nuts Have An Oversize Diameter And Thread, And Upon Front Seat Track Anchor Bolt Installation, The Threads May Have Been Stripped.. Follwoing Is The Summary Of Corrective Actions Taken: The Dealer Will Inspect And, If Necessary, Repair Any Stripped Weld Nuts And Install Larger Size Bolts To Anchor The Seat Track To The Floor At No Cost To Owner.
vehicle Description: Passenger Vehicles.system: Interior; Floor Pan Attachments.consequences Of Defect: In The Event Of A Collision, The Front Seat Candisengage From Floor Mounting Creating The Potential For Serious Personalinjury To Occupant.

This recall was issued on Jan 09, 1979 for 1979 Ford Ltd Ii, manufactured by FORD MOTOR COMPANY, in response to Seats,mid/rear Assembly problems.

1979 Ford Thunderbird Recall | The Involved Vehicles May Have Been Built With Incorrect Weld Nuts That Attach The Rear Portion Of The Front Outboard Seat Track To The Floor Pan. The Incorrect Nuts Have An Oversize Diameter And

1979 Ford Thunderbird Seats,mid/rear Assembly Recall | Jan 09, 1979

The Involved Vehicles May Have Been Built With Incorrect Weld Nuts That Attach The Rear Portion Of The Front Outboard Seat Track To The Floor Pan. The Incorrect Nuts Have An Oversize Diameter And Thread, And Upon Front Seat Track Anchor Bolt Installation, The Threads May Have Been Stripped.. Follwoing Is The Summary Of Corrective Actions Taken: The Dealer Will Inspect And, If Necessary, Repair Any Stripped Weld Nuts And Install Larger Size Bolts To Anchor The Seat Track To The Floor At No Cost To Owner.
vehicle Description: Passenger Vehicles.system: Interior; Floor Pan Attachments.consequences Of Defect: In The Event Of A Collision, The Front Seat Candisengage From Floor Mounting Creating The Potential For Serious Personalinjury To Occupant.

This recall was issued on Jan 09, 1979 for 1979 Ford Thunderbird, manufactured by FORD MOTOR COMPANY, in response to Seats,mid/rear Assembly problems.

1979 Ford Ranchero Recall | The Involved Vehicles May Have Been Built With Incorrect Weld Nuts That Attach The Rear Portion Of The Front Outboard Seat Track To The Floor Pan. The Incorrect Nuts Have An Oversize Diameter And

1979 Ford Ranchero Seats,mid/rear Assembly Recall | Jan 09, 1979

The Involved Vehicles May Have Been Built With Incorrect Weld Nuts That Attach The Rear Portion Of The Front Outboard Seat Track To The Floor Pan. The Incorrect Nuts Have An Oversize Diameter And Thread, And Upon Front Seat Track Anchor Bolt Installation, The Threads May Have Been Stripped.. Follwoing Is The Summary Of Corrective Actions Taken: The Dealer Will Inspect And, If Necessary, Repair Any Stripped Weld Nuts And Install Larger Size Bolts To Anchor The Seat Track To The Floor At No Cost To Owner.
vehicle Description: Passenger Vehicles.system: Interior; Floor Pan Attachments.consequences Of Defect: In The Event Of A Collision, The Front Seat Candisengage From Floor Mounting Creating The Potential For Serious Personalinjury To Occupant.

This recall was issued on Jan 09, 1979 for 1979 Ford Ranchero, manufactured by FORD MOTOR COMPANY, in response to Seats,mid/rear Assembly problems.

1979 Ford F100 Recall | The Wheel Assembly May Contain Substandard Welds In The Area Where The Disc Is Attached To The Rim. As A Result, Cracks Can Form In The Wheel Assembly, Causing Air Loss And

1979 Ford F100 Wheels Recall | Aug 07, 1979

The Wheel Assembly May Contain Substandard Welds In The Area Where The Disc Is Attached To The Rim. As A Result, Cracks Can Form In The Wheel Assembly, Causing Air Loss And An Underinflated Tire.. Follwoing Is The Summary Of Corrective Actions Taken: Dealer Will Inspect And Replace Any Defective Wheels Without Charge To Owner.
vehicle Description: Light Trucks Equipped With 15 X 5.5k Wheel Assemblies.system: Wheels; Wheel Assembly.consequences Of Defect: Low Tire Inflation Pressures Could Cause Loss Ofvehicle Control And An Accident. Also, If The Spot Welds Fail, The Rim And Tirecould Separate From The Wheel Disc, With Consequent Loss Of Control Andaccident.

This recall was issued on Aug 07, 1979 for 1979 Ford F100, manufactured by FORD MOTOR COMPANY, in response to Wheels problems.

1979 Ford E100 Recall | The Wheel Assembly May Contain Substandard Welds In The Area Where The Disc Is Attached To The Rim. As A Result, Cracks Can Form In The Wheel Assembly, Causing Air Loss And

1979 Ford E100 Wheels Recall | Aug 07, 1979

The Wheel Assembly May Contain Substandard Welds In The Area Where The Disc Is Attached To The Rim. As A Result, Cracks Can Form In The Wheel Assembly, Causing Air Loss And An Underinflated Tire.. Follwoing Is The Summary Of Corrective Actions Taken: Dealer Will Inspect And Replace Any Defective Wheels Without Charge To Owner.
vehicle Description: Light Trucks Equipped With 15 X 5.5k Wheel Assemblies.system: Wheels; Wheel Assembly.consequences Of Defect: Low Tire Inflation Pressures Could Cause Loss Ofvehicle Control And An Accident. Also, If The Spot Welds Fail, The Rim And Tirecould Separate From The Wheel Disc, With Consequent Loss Of Control Andaccident.

This recall was issued on Aug 07, 1979 for 1979 Ford E100, manufactured by FORD MOTOR COMPANY, in response to Wheels problems.

1979 Ford Club Wagon Recall | The Wheel Assembly May Contain Substandard Welds In The Area Where The Disc Is Attached To The Rim. As A Result, Cracks Can Form In The Wheel Assembly, Causing Air Loss And

1979 Ford Club Wagon Wheels Recall | Aug 07, 1979

The Wheel Assembly May Contain Substandard Welds In The Area Where The Disc Is Attached To The Rim. As A Result, Cracks Can Form In The Wheel Assembly, Causing Air Loss And An Underinflated Tire.. Follwoing Is The Summary Of Corrective Actions Taken: Dealer Will Inspect And Replace Any Defective Wheels Without Charge To Owner.
vehicle Description: Light Trucks Equipped With 15 X 5.5k Wheel Assemblies.system: Wheels; Wheel Assembly.consequences Of Defect: Low Tire Inflation Pressures Could Cause Loss Ofvehicle Control And An Accident. Also, If The Spot Welds Fail, The Rim And Tirecould Separate From The Wheel Disc, With Consequent Loss Of Control Andaccident.

This recall was issued on Aug 07, 1979 for 1979 Ford Club Wagon, manufactured by FORD MOTOR COMPANY, in response to Wheels problems.

1979 Ford Bronco Recall | The Wheel Assembly May Contain Substandard Welds In The Area Where The Disc Is Attached To The Rim. As A Result, Cracks Can Form In The Wheel Assembly, Causing Air Loss And

1979 Ford Bronco Wheels Recall | Aug 07, 1979

The Wheel Assembly May Contain Substandard Welds In The Area Where The Disc Is Attached To The Rim. As A Result, Cracks Can Form In The Wheel Assembly, Causing Air Loss And An Underinflated Tire.. Follwoing Is The Summary Of Corrective Actions Taken: Dealer Will Inspect And Replace Any Defective Wheels Without Charge To Owner.
vehicle Description: Light Trucks Equipped With 15 X 5.5k Wheel Assemblies.system: Wheels; Wheel Assembly.consequences Of Defect: Low Tire Inflation Pressures Could Cause Loss Ofvehicle Control And An Accident. Also, If The Spot Welds Fail, The Rim And Tirecould Separate From The Wheel Disc, With Consequent Loss Of Control Andaccident.

This recall was issued on Aug 07, 1979 for 1979 Ford Bronco, manufactured by FORD MOTOR COMPANY, in response to Wheels problems.