1980 Ford Ltd Recall | Misbuilt Wiring Harnesses May Have Been Installed On Certain Vehicles. This Would Allow The Power Windows To Be Operated While The Ignition Key Is Turned Off, A Condition Which Fails To Comply With

1980 Ford Ltd Visibility,power Window Devices And Controls Recall | May 16, 1980

Misbuilt Wiring Harnesses May Have Been Installed On Certain Vehicles. This Would Allow The Power Windows To Be Operated While The Ignition Key Is Turned Off, A Condition Which Fails To Comply With Federal Motor Vehicle Safety Standard No. 118, “power Operated Window Systems”.. Follwoing Is The Summary Of Corrective Actions Taken: Dealer Will Inspect The Wiring Harness And Repair, If Necessary.
vehicle Description: Passenger Vehicles.system: Visual; Power Windows.consequences Of Defect: Accident And Injury Could Result If Children Are Ableto Operate Power Windows Without Adult Supervision.

This recall was issued on May 16, 1980 for 1980 Ford Ltd, manufactured by FORD MOTOR COMPANY, in response to Visibility,power Window Devices And Controls problems.

1980 Ford Ltd Recall | The Involved Vehicles May Start In Reverse Gear. This Does Not Comply With Federal Motor Vehicle Safety Standard No. 102, “transmission Shift Lever Sequence, Starter Interlock, And Transmission Braking Affect”.

1980 Ford Ltd Electrical System,ignition,switch Recall | Sept 23, 1980

The Involved Vehicles May Start In Reverse Gear. This Does Not Comply With Federal Motor Vehicle Safety Standard No. 102, “transmission Shift Lever Sequence, Starter Interlock, And Transmission Braking Affect”. Some Of These Vehicles May Be Equipped With A Defective Neutral Start Switch That Occasionally Permits Engine Starting With The Transmission Shift Lever In The Reverse (“r”) Position.. Follwoing Is The Summary Of Corrective Actions Taken: Dealer Will Inspect The Involved Vehicles And, If Necessary, Replace The Transmission Neutral Start Switch At No Charge To Owner.
vehicle Description: Passenger Vehicles.system: Electrical; Gear Shift.consequences Of Defect: Starting The Engine With The Shift Selector In Thereverse Position Can Result In Unexpected Rearward Motion Of The Vehicle Whichcould Cause Injury To Persons Or Damage To Property Behind The Vehicle.

This recall was issued on Sept 23, 1980 for 1980 Ford Ltd, manufactured by FORD MOTOR COMPANY, in response to Electrical System,ignition,switch problems.

1980 Ford Ltd Recall | Some Of The Involved Vehicles Have Electrical Relay Systems Which May Be Susceptible To Water Leakage Into The Relay Case. Water Entry May Cause A Short Circuit Within The Relay.

1980 Ford Ltd Electrical System,wiring,interior/under Dash Recall | Nov 13, 1980

Some Of The Involved Vehicles Have Electrical Relay Systems Which May Be Susceptible To Water Leakage Into The Relay Case. Water Entry May Cause A Short Circuit Within The Relay.. Follwoing Is The Summary Of Corrective Actions Taken: Dealer Will Inspect Vehicles For The Type Of Relay Used, Reorient Wiring Harnesses As Necessary, And Replace Suspect Relays With New Parts.
vehicle Description: Passenger Vehicles Equipped With 5.0 And 5.8 Literengines.system: Electrical; Wiring Harness.consequences Of Defect: A Short Circuit Within The Relay May Cause Overheatingwhich Could Result In A Vehicle Fire And Personal Injury To Passengers.

This recall was issued on Nov 13, 1980 for 1980 Ford Ltd, manufactured by FORD MOTOR COMPANY, in response to Electrical System,wiring,interior/under Dash problems.

1980 Ford Ltd Recall | Some Of The Flexible Five-blade Engine Cooling Fans May Be Subject To High Blade Stresses That Can Result From Resonant Vibration Inputs Occurring During Normal Vehicle Operation. This Can Result In The Blades Cracking

1980 Ford Ltd Engine And Engine Cooling,cooling System,fan Recall | Nov 07, 1980

Some Of The Flexible Five-blade Engine Cooling Fans May Be Subject To High Blade Stresses That Can Result From Resonant Vibration Inputs Occurring During Normal Vehicle Operation. This Can Result In The Blades Cracking Due To Fatigue, And Portions Of The Blade May Separate From The Fan Assembly Without Prior Warning.. Follwoing Is The Summary Of Corrective Actions Taken: Dealer Will Replace Defective Fan With One Of An Improved Five-bladed Design, Without Charge To Owner.
vehicle Description: Passenger Vehicles Equipped With 351w Cid Engines And Airconditioning.system: Engine Cooling; Fan.consequences Of Defect: Blade Portions Propelled From A Rotating Fan May Damageunderhood Components And Cause Personal Injury To Bystanders If The Hood Isopen.

This recall was issued on Nov 07, 1980 for 1980 Ford Ltd, manufactured by FORD MOTOR COMPANY, in response to Engine And Engine Cooling,cooling System,fan problems.

1980 Ford Ltd Recall | The Involved Vehicles Were Produced Without Surlyn-coated Foil Insulators Between The Isolator And Bracket Assemblies And The Rear Bumper Reinforcements. An Epoxy Coating Was Also Omitted From The Bracket Assemblies. When Exposed To

1980 Ford Ltd Structure,body,bumpers Recall | Oct 24, 1980

The Involved Vehicles Were Produced Without Surlyn-coated Foil Insulators Between The Isolator And Bracket Assemblies And The Rear Bumper Reinforcements. An Epoxy Coating Was Also Omitted From The Bracket Assemblies. When Exposed To The Corrosive Action Of Road Salt, The Aluminum Rear Bumper Reinforcement Could Experience Galvonic Corrosion At The Attachment Surfaces. This Would Reduce The Strength Of The Reinforcements And Could Result In Bumper Separation.. Follwoing Is The Summary Of Corrective Actions Taken: Dealer Will Inspect Rear Bumper Attachment Components And Replace Them Without Charge, If Necessary.
vehicle Description: Passenger Vehicles.system: Structure; Bumper Assembly, Attachments.consequences Of Defect: Bumper Separation Could Present An Obstacle To Traffic,possibly Resulting In A Vehicle Accident.

This recall was issued on Oct 24, 1980 for 1980 Ford Ltd, manufactured by FORD MOTOR COMPANY, in response to Structure,body,bumpers problems.