1991 Ford E150 Recall | Safety Belt Anchorages Did Not Meet Load Requirements Of Fmvss 210; Belt Anchorage Bar Pulled Through The Floor Of Vehicle When Subjected To Loads Of Fmvss 210 Test.

1991 Ford E150 Seat Belts,front,anchorage Recall | July 03, 1991

Safety Belt Anchorages Did Not Meet Load Requirements Of Fmvss 210; Belt Anchorage Bar Pulled Through The Floor Of Vehicle When Subjected To Loads Of Fmvss 210 Test.seat Occupants Would Not Have Adequate Protection In Theevent Of A Sudden Stop Or Accident And Would Be Subject To Increased Riskof Injury.. Follwoing Is The Summary Of Corrective Actions Taken: Secure Safety Belt Anchorage Bar To Vehicle Frame For Added Strength.
system: Safety Belt Anchors; Fmvss 210.vehicle Description: Conversion Vans.

This recall was issued on July 03, 1991 for 1991 Ford E150, manufactured by VAN CRAFT CORP, in response to Seat Belts,front,anchorage problems.

1991 Ford Full Size Van Recall | Incorrect Certification Labels Were Installed.

1991 Ford Full Size Van Equipment,other,labels Recall | June 18, 1991

Incorrect Certification Labels Were Installed.vehicles Would Not Comply With Part 567.. Follwoing Is The Summary Of Corrective Actions Taken: Install New Certification Labels.
system: Certification Labels; Part 567vehicle Description: Dixie Vans.

This recall was issued on June 18, 1991 for 1991 Ford Full Size Van, manufactured by DIXIE VANS INC., in response to Equipment,other,labels problems.

1991 Ford Explorer Recall | The Front Heat Shield May Contact The Front Of The Plastic Fuel Tank, Causing Cuts Or Other Damage To The Extent Of Penetration.

1991 Ford Explorer Fuel System, Gasoline,storage,tank Assembly Recall | Feb 11, 1991

The Front Heat Shield May Contact The Front Of The Plastic Fuel Tank, Causing Cuts Or Other Damage To The Extent Of Penetration.this Penetration Of The Fuel Tank Causes Vapors To Escapeand Possibly Fuel To Spill, Which Could Catch Fire In The Presence Of Anignition Source.. Follwoing Is The Summary Of Corrective Actions Taken: Relocate The Heat Shield; Inspect And Replace Damaged Fuel Fuel Tanks.
system: Fuel Tank And Heat Shield.vehicle Description : Multi-purpose Passenger Vehicle.

This recall was issued on Feb 11, 1991 for 1991 Ford Explorer, manufactured by FORD MOTOR COMPANY, in response to Fuel System, Gasoline,storage,tank Assembly problems.

1991 Ford Explorer Recall | The Hot Plate Weld Which Attaches The Vapor Vent Valve Carrier To The Top Of The Plastic Fuel Tank May Partially Fracture, Allowing Vapor Of Fuel To Escape From The Top Of The Tank.

1991 Ford Explorer Fuel System, Gasoline,storage,tank Assembly Recall | Feb 11, 1991

The Hot Plate Weld Which Attaches The Vapor Vent Valve Carrier To The Top Of The Plastic Fuel Tank May Partially Fracture, Allowing Vapor Of Fuel To Escape From The Top Of The Tank.the Escaped Vapor Or Leaked Fuel Could Cause A Fire Inthe Presence Of A Source Of Ignition.. Follwoing Is The Summary Of Corrective Actions Taken: Fuel Tank Will Be Removed And Inspected For Weld Integrity. Fuel Tanks With Inadequate Welds Will Be Replaced.
system: Vapor Vent Valve Carrier Weld To Plastic Fuel Tank.vehicle Description: Multi-purpose Passenger Vehicles.

This recall was issued on Feb 11, 1991 for 1991 Ford Explorer, manufactured by FORD MOTOR COMPANY, in response to Fuel System, Gasoline,storage,tank Assembly problems.

1991 Ford Explorer Recall | Rear Bumper Reinforcement May Be Subject To Fatigue Cracking Under Extended Trailer Tow Service When Using A Bumper-mounted Trailer Hitch Ball.

1991 Ford Explorer Structure,body,bumpers Recall | Feb 12, 1991

Rear Bumper Reinforcement May Be Subject To Fatigue Cracking Under Extended Trailer Tow Service When Using A Bumper-mounted Trailer Hitch Ball.under Extreme Conditions, Bumper Could Separate From Thevehicle When Using A Bumper Mounted Trailer Hitch Ball.. Follwoing Is The Summary Of Corrective Actions Taken: Install Two Brackets To Reinforce The Bumper.
system: Rear Bumper Reinforcement.vehicle Description: Multi-purpose Passenger Vehicle.note: Bumper Mounted Trailer Hitch Ball Assembly Should Not Be Used Until Repairprocedure Is Completed.

This recall was issued on Feb 12, 1991 for 1991 Ford Explorer, manufactured by FORD MOTOR COMPANY, in response to Structure,body,bumpers problems.

1991 Ford Probe Recall | Brackets Mounting Automatic Shoulder Belt Retractor Assembly May Have An Understrength Spot Weld.

1991 Ford Probe Seat Belts,front,anchorage Recall | Jan 01, 1991

Brackets Mounting Automatic Shoulder Belt Retractor Assembly May Have An Understrength Spot Weld.shoulder Belt Could Fail In A Collision Increasing Therisk Of Injury To The Occupant.. Follwoing Is The Summary Of Corrective Actions Taken: Install Two Bolts In The Brackets To Prevent Shoulder Belt Failure.
system: Safety Belt Retractor Bracket Attachment.vehicle Description: Passenger Cars; Probe Gl Models Only.

This recall was issued on Jan 01, 1991 for 1991 Ford Probe, manufactured by FORD MOTOR COMPANY, in response to Seat Belts,front,anchorage problems.

1991 Ford Thunderbird Recall | The Park Rod Assembly Contains A Park Cam With Inadequate Surface Hardness, Which Could Lead To Park Disengagement Or No Park Engagement When The Lever Is Placed In Park.

1991 Ford Thunderbird Power Train,automatic Transmission Recall | Mar 18, 1991

The Park Rod Assembly Contains A Park Cam With Inadequate Surface Hardness, Which Could Lead To Park Disengagement Or No Park Engagement When The Lever Is Placed In Park.if Park Is Not Engaged And The Parking Brake Is Off, Avehicle Roll-away Could Result.. Follwoing Is The Summary Of Corrective Actions Taken: Replace Park Rod Assembly On Automatic Transmissions.
system: Automatic Transmission Park Rod Assembly.vehicle Description: Passenger Cars With Automatic Overdrive Transmissions.

This recall was issued on Mar 18, 1991 for 1991 Ford Thunderbird, manufactured by FORD MOTOR COMPANY, in response to Power Train,automatic Transmission problems.

1991 Ford Crown Victoria Recall | The Park Rod Assembly Contains A Park Cam With Inadequate Surface Hardness, Which Could Lead To Park Disengagement Or No Park Engagement When The Lever Is Placed In Park.

1991 Ford Crown Victoria Power Train,automatic Transmission Recall | Mar 18, 1991

The Park Rod Assembly Contains A Park Cam With Inadequate Surface Hardness, Which Could Lead To Park Disengagement Or No Park Engagement When The Lever Is Placed In Park.if Park Is Not Engaged And The Parking Brake Is Off, Avehicle Roll-away Could Result.. Follwoing Is The Summary Of Corrective Actions Taken: Replace Park Rod Assembly On Automatic Transmissions.
system: Automatic Transmission Park Rod Assembly.vehicle Description: Passenger Cars With Automatic Overdrive Transmissions.

This recall was issued on Mar 18, 1991 for 1991 Ford Crown Victoria, manufactured by FORD MOTOR COMPANY, in response to Power Train,automatic Transmission problems.

1991 Ford Ranger Recall | When The Automatic Transmission Shift Lever Is Placed In The Park Position, The Park Pawl Does Not Always Abut Or Engage The Park Gear.

1991 Ford Ranger Power Train,automatic Transmission Recall | Nov 04, 1991

When The Automatic Transmission Shift Lever Is Placed In The Park Position, The Park Pawl Does Not Always Abut Or Engage The Park Gear.driver May Believe The Vehicle Is Safely Engaged In Parkwhen The Gear Is Not Truly Engaged. This Can Lead To The Vehicle Jumping Out Ofgear Unintentionally, Vehicle Rollaway When Parked On A Sloped Surface, Andinadvertent Motion When The Vehicle Is Started. All Of These Conditions Canresult In A Vehicle Accident.. Follwoing Is The Summary Of Corrective Actions Taken: Repair The Transmission With A New Park Pawl.
system: Transmission.vehicle Description: Pickup Trucks, Vans, And Multi-purpose Vehicles Equippedwith A4ld Automatic Transmissions.

This recall was issued on Nov 04, 1991 for 1991 Ford Ranger, manufactured by FORD MOTOR COMPANY, in response to Power Train,automatic Transmission problems.

1991 Ford Explorer Recall | When The Automatic Transmission Shift Lever Is Placed In The Park Position, The Park Pawl Does Not Always Abut Or Engage The Park Gear.

1991 Ford Explorer Power Train,automatic Transmission Recall | Nov 04, 1991

When The Automatic Transmission Shift Lever Is Placed In The Park Position, The Park Pawl Does Not Always Abut Or Engage The Park Gear.driver May Believe The Vehicle Is Safely Engaged In Parkwhen The Gear Is Not Truly Engaged. This Can Lead To The Vehicle Jumping Out Ofgear Unintentionally, Vehicle Rollaway When Parked On A Sloped Surface, Andinadvertent Motion When The Vehicle Is Started. All Of These Conditions Canresult In A Vehicle Accident.. Follwoing Is The Summary Of Corrective Actions Taken: Repair The Transmission With A New Park Pawl.
system: Transmission.vehicle Description: Pickup Trucks, Vans, And Multi-purpose Vehicles Equippedwith A4ld Automatic Transmissions.

This recall was issued on Nov 04, 1991 for 1991 Ford Explorer, manufactured by FORD MOTOR COMPANY, in response to Power Train,automatic Transmission problems.