1992 Ford E-150 Recall | The Tire Certification Labels Incorrectly Identify The Vehicle Tire Requirements As P235/75r15 Sl (standard Load), Rather Than As P235/75r15 Xl (extra Load).

1992 Ford E-150 Equipment,other,labels Recall | Aug 24, 1992

The Tire Certification Labels Incorrectly Identify The Vehicle Tire Requirements As P235/75r15 Sl (standard Load), Rather Than As P235/75r15 Xl (extra Load).the Certification Labels On The Affected Vehicles Do Notcomply With Fmvss 120, “tire Selection And Rims For Motor Vehicles Other Thanpassenger Cars.” Incorrect Tire Selection Could Result In Sudden Failure Ofa Tire While The Vehicle Is In Motion, And Result In A Vehicle Accident.. Follwoing Is The Summary Of Corrective Actions Taken: Correct Tire Information Labels And Installation Instructions Will Be Mailed To The Owners Of These Vehicles. Owners Will Be Instructed That Dealers Can Install The Label Provided If They Prefer.
system: Safety Compliance Certification Labels.vehicle Description: Vans.

This recall was issued on Aug 24, 1992 for 1992 Ford E-150, manufactured by FORD MOTOR COMPANY, in response to Equipment,other,labels problems.

1992 Ford Econoline Recall | The Tire Certification Labels Incorrectly Identify The Vehicle Tire Requirements As P235/75r15 Sl (standard Load), Rather Than As P235/75r15 Xl (extra Load).

1992 Ford Econoline Equipment,other,labels Recall | Aug 24, 1992

The Tire Certification Labels Incorrectly Identify The Vehicle Tire Requirements As P235/75r15 Sl (standard Load), Rather Than As P235/75r15 Xl (extra Load).the Certification Labels On The Affected Vehicles Do Notcomply With Fmvss 120, “tire Selection And Rims For Motor Vehicles Other Thanpassenger Cars.” Incorrect Tire Selection Could Result In Sudden Failure Ofa Tire While The Vehicle Is In Motion, And Result In A Vehicle Accident.. Follwoing Is The Summary Of Corrective Actions Taken: Correct Tire Information Labels And Installation Instructions Will Be Mailed To The Owners Of These Vehicles. Owners Will Be Instructed That Dealers Can Install The Label Provided If They Prefer.
system: Safety Compliance Certification Labels.vehicle Description: Vans.

This recall was issued on Aug 24, 1992 for 1992 Ford Econoline, manufactured by FORD MOTOR COMPANY, in response to Equipment,other,labels problems.

1992 Ford Taurus Recall | The Rigid Mounted Safety Belt Buckles Are Defective In Three Ways. First, A Fastened Safety Belt Buckle Will Not Unlatch When The Release Button Is Depressed. This Results From Interference Between The

1992 Ford Taurus Seat Belts,front,buckle Assembly Recall | Aug 17, 1992

The Rigid Mounted Safety Belt Buckles Are Defective In Three Ways. First, A Fastened Safety Belt Buckle Will Not Unlatch When The Release Button Is Depressed. This Results From Interference Between The Buckle Ejector Finger And The Buckle Tongue Window. The Second Defect Is The Safety Belt Buckle May Not Latch. The Third Possible Defect Is That The Tongue May Be Retained By The Buckle, But It May Not Be Latched Sufficiently To Provide Occupant Protection.an Insufficiently Latched Or Unlatched Safety Beltincreases The Risk Of Injury To Seat Occupants In The Event Of A Sudden Stop Oraccident. If The Safety Belt Buckle Will Not Unlatch, It Will Not Allow Theoccupant To Get Out Of The Vehicle In An Emergency Situation.. Follwoing Is The Summary Of Corrective Actions Taken: Ford Will Replace The Rigid Mounted Safety Belt Buckles With End Release Safety Belt Buckles Designed To Prevent Latch Problems.
system: Safety Belt Buckle.vehicle Description: Passenger Cars And Utility Vehicles.note: Only The End Release Buckles On “rigid” Mountings Are Susceptible To Thismalfunction, The Web-mounted Front Center End Release Buckles And Theweb-mounted Rear Facing Third Seat End Release Buckles In Taurus Or Sablevehicles Will Not Be Replaced. Also, The Web-mounted Front Center Buckles Inexplorer Vehicles Will Not Be Replaced.

This recall was issued on Aug 17, 1992 for 1992 Ford Taurus, manufactured by FORD MOTOR COMPANY, in response to Seat Belts,front,buckle Assembly problems.

1992 Ford Explorer Recall | The Rigid Mounted Safety Belt Buckles Are Defective In Three Ways. First, A Fastened Safety Belt Buckle Will Not Unlatch When The Release Button Is Depressed. This Results From Interference Between The

1992 Ford Explorer Seat Belts,front,buckle Assembly Recall | Aug 17, 1992

The Rigid Mounted Safety Belt Buckles Are Defective In Three Ways. First, A Fastened Safety Belt Buckle Will Not Unlatch When The Release Button Is Depressed. This Results From Interference Between The Buckle Ejector Finger And The Buckle Tongue Window. The Second Defect Is The Safety Belt Buckle May Not Latch. The Third Possible Defect Is That The Tongue May Be Retained By The Buckle, But It May Not Be Latched Sufficiently To Provide Occupant Protection.an Insufficiently Latched Or Unlatched Safety Beltincreases The Risk Of Injury To Seat Occupants In The Event Of A Sudden Stop Oraccident. If The Safety Belt Buckle Will Not Unlatch, It Will Not Allow Theoccupant To Get Out Of The Vehicle In An Emergency Situation.. Follwoing Is The Summary Of Corrective Actions Taken: Ford Will Replace The Rigid Mounted Safety Belt Buckles With End Release Safety Belt Buckles Designed To Prevent Latch Problems.
system: Safety Belt Buckle.vehicle Description: Passenger Cars And Utility Vehicles.note: Only The End Release Buckles On “rigid” Mountings Are Susceptible To Thismalfunction, The Web-mounted Front Center End Release Buckles And Theweb-mounted Rear Facing Third Seat End Release Buckles In Taurus Or Sablevehicles Will Not Be Replaced. Also, The Web-mounted Front Center Buckles Inexplorer Vehicles Will Not Be Replaced.

This recall was issued on Aug 17, 1992 for 1992 Ford Explorer, manufactured by FORD MOTOR COMPANY, in response to Seat Belts,front,buckle Assembly problems.

1992 Ford F-350 Recall | The Sound Insulation On The Engine Side Of The Dash Panel Can Contact The Exhaust Manifold.

1992 Ford F-350 Engine And Engine Cooling,engine,gasoline Recall | Aug 04, 1992

The Sound Insulation On The Engine Side Of The Dash Panel Can Contact The Exhaust Manifold.contact Between The Insulation And The Hot Exhaustmanifold May Result In A Engine Compartment Fire.. Follwoing Is The Summary Of Corrective Actions Taken: Dealers Will Modify The Sound Insulator At No Cost To Owners.
system: Engine Compartment; Sound Insulation.vehicle Description: Trucks And Chassis Cabs Equipped With 7.3 Liter Dieselengines.

This recall was issued on Aug 04, 1992 for 1992 Ford F-350, manufactured by FORD MOTOR COMPANY, in response to Engine And Engine Cooling,engine,gasoline problems.

1992 Ford F-250 Recall | The Sound Insulation On The Engine Side Of The Dash Panel Can Contact The Exhaust Manifold.

1992 Ford F-250 Engine And Engine Cooling,engine,gasoline Recall | Aug 04, 1992

The Sound Insulation On The Engine Side Of The Dash Panel Can Contact The Exhaust Manifold.contact Between The Insulation And The Hot Exhaustmanifold May Result In A Engine Compartment Fire.. Follwoing Is The Summary Of Corrective Actions Taken: Dealers Will Modify The Sound Insulator At No Cost To Owners.
system: Engine Compartment; Sound Insulation.vehicle Description: Trucks And Chassis Cabs Equipped With 7.3 Liter Dieselengines.

This recall was issued on Aug 04, 1992 for 1992 Ford F-250, manufactured by FORD MOTOR COMPANY, in response to Engine And Engine Cooling,engine,gasoline problems.

1992 Ford Escort Recall | Fatigue Cracks Can Develop In The Solder Joint Between The Fuel Return Tube And The Fuel Pump Sending Unit Located At The Top Of The Fuel Tank.

1992 Ford Escort Fuel System, Gasoline Recall | Aug 19, 1992

Fatigue Cracks Can Develop In The Solder Joint Between The Fuel Return Tube And The Fuel Pump Sending Unit Located At The Top Of The Fuel Tank.should A Crack Develop, Fuel Vapor Can Escape From Thetank When The Tank Is Full, And A Small Amount Of Fuel Can Leak From The Crack.fuel Leaks Can Result In Fire When Exposed To A Source Of Ignition.. Follwoing Is The Summary Of Corrective Actions Taken: Install A New Fuel Pump Sending Assembly.
system: Fuel System.vehicle Description: Passenger Vehicles Equipped With Fuel Pump Sendingassemblies Produced By Ford Electrical And Fuel Handling Division (fehd).

This recall was issued on Aug 19, 1992 for 1992 Ford Escort, manufactured by FORD MOTOR COMPANY, in response to Fuel System, Gasoline problems.

1992 Ford Econoline Recall | The Safety Belt Anchorage For The Rear Bench Seat Failed To Comply With The Standards Of Fmvss 210.

1992 Ford Econoline Seat Belts,front,anchorage Recall | May 04, 1992

The Safety Belt Anchorage For The Rear Bench Seat Failed To Comply With The Standards Of Fmvss 210.failure To Meet The Load Requirements Of Fmvss 210 Placethe Seat Occupants In Increased Risk Of Injury In The Event Of A Sudden Stopor Accident.. Follwoing Is The Summary Of Corrective Actions Taken: The Manufacture Will Replace The Non-complying Safety Belt Anchorage With A New Anchorage That Meets The Requirements Of Fmvss 210.
system: Rear Bench Seat: Safety Belt Anchorage, Fmvss 210.vehicle Description: Full Sized Van (econoline) Conversions.note: This Recall Is Being Conducted By Glaval Corporation;29340 Lexington Park Drive; Elkhart, Indiana46515.

This recall was issued on May 04, 1992 for 1992 Ford Econoline, manufactured by GLAVAL BUS DIVISION, in response to Seat Belts,front,anchorage problems.

1992 Ford Crown Victoria Recall | Incorrect Instrument Panel Wiring Assemblies In Some Vehicles Will Not Actuate The “anti-lock” Brake Warning Lights.

1992 Ford Crown Victoria Unknown Or Other Recall | Feb 19, 1992

Incorrect Instrument Panel Wiring Assemblies In Some Vehicles Will Not Actuate The “anti-lock” Brake Warning Lights.the Vehicles Do Not Meet The Specifications Of Fmvss 105.the Driver Would Not Be Aware When The Anti-lock Brake System Is Malfunctioning.. Follwoing Is The Summary Of Corrective Actions Taken: Modify The Wire Assembly To Allow Actuation Of The Anti-lock Brake Warning Lights.
system: Instrument Panel; Anti-lock Brake Warning Lights; Fmvss 105.vehicle Description: Passenger Cars.

This recall was issued on Feb 19, 1992 for 1992 Ford Crown Victoria, manufactured by FORD MOTOR COMPANY, in response to Unknown Or Other problems.

1992 Ford Crown Victoria Recall | The Rear Brake Lines Have Inadequate Clearance Between The Brake Tube And The Vehicle Underbody In The Area Of The Left Rear Wheel Opening.

1992 Ford Crown Victoria Service Brakes, Hydraulic,foundation Components,hoses, Lines/piping, And Fittings Recall | May 19, 1992

The Rear Brake Lines Have Inadequate Clearance Between The Brake Tube And The Vehicle Underbody In The Area Of The Left Rear Wheel Opening.inadequate Clearance Can Cause Abrasion Of The Brake Lineand A Leak Can Develop, Resulting In Loss Of Brake Fluid To The Rear Brakesystem And Increased Stopping Distances.. Follwoing Is The Summary Of Corrective Actions Taken: Repair Any Brake Lines That Have An Indication Of Contact Or Have The Potential For Contact With The Body Of The Vehicle. Relocate Lines, If Necessary.
system: Rear Brakes.vehicle Description: Passenger Cars With 5.8 Liter Engines And Policeperformance Packages.

This recall was issued on May 19, 1992 for 1992 Ford Crown Victoria, manufactured by FORD MOTOR COMPANY, in response to Service Brakes, Hydraulic,foundation Components,hoses, Lines/piping, And Fittings problems.