1994 Ford B600 Recall | The Steering Gears Have An Improperly Machined Snap Ring Groove. This Can Cause A Fracture Of The Snap Ring With Subsequent Damage To The Recirculating Ball Guide Tube. Also, The O-ring Seal

1994 Ford B600 Steering,rack And Pinion Recall | June 27, 1994

The Steering Gears Have An Improperly Machined Snap Ring Groove. This Can Cause A Fracture Of The Snap Ring With Subsequent Damage To The Recirculating Ball Guide Tube. Also, The O-ring Seal In Vehicles Built After February 1988 Does Not Meet Specifications And Is Inadequate, Causing Interior Leakage Around The O-ring / Glide Ring Seal In The Steering Gear.the Fracture Of The Snap Ring Results In Increasing Deterioration Of The Ability To Turn The Vehicle To The Right. The Driver Would Experience Increased Steering Efforts Or A “crunchy” Feeling At The Steering Wheel. The Inadequate O-ring Seal Causes Momentary Reductions In Power Steering Assist At Low Speed And Certain Left Turn Maneuvers. Both Conditions Result In Decreased Steering Ability.. Follwoing Is The Summary Of Corrective Actions Taken: Dealers Will Rebuild The Steering Gear. If A Broken Snap Ring Is Found During Rebuilding, The Steering Gear Will Be Replaced With A Remanufactured Unit.
system: Steering: Gear: Rack And Pinion.vehicle Description: School Bus Chassis.note: If Your Vehicle Is Presented To An Authorized Dealer On An Agreed Upon Service Date And The Remedy Is Not Provided Within A Reasonable Time And Freeof Charge Or The Remedy Does Not Correct The Defect Or Noncompliance, Please Contact The Ford Service Center At 1-800-392-3673. Also, Contact The National Highway Traffic Safety Administration’s Auto Safety Hotline At 1-800-424-9393.

This recall was issued on June 27, 1994 for 1994 Ford B600, manufactured by FORD MOTOR COMPANY, in response to Steering,rack And Pinion problems.

1994 Ford B600 Recall | System: Electrical System; Battery. Vehicle Description: Medium Duty School Bus Chassis Equipped With Hydraulic Brakes, Tilt Hoods, 5.9l, 6.6l Or 7.6l Diesel Engines Or 6.1l

1994 Ford B600 Electrical System,battery Recall | Mar 26, 1994

System: Electrical System; Battery. Vehicle Description: Medium Duty School Bus Chassis Equipped With Hydraulic Brakes, Tilt Hoods, 5.9l, 6.6l Or 7.6l Diesel Engines Or 6.1l Or 7.0l Gasoline Engines And Originally Sold Or Currently Registered In Connecticut, Illinois, Indiana, Maine, Massachusetts, Michigan, New Hampshire, New Jersey, New York, Ohio, Pennsylvania ,rhode Island, Vermont, And Wisconsin. The Battery Power Junction Block Mounted On The Right Fender Apron, Which Serves As An Electrical Connection Point For Several Engine Compartment Systems, Is Susceptible To Road Splash. The Terminals At The Junction Block Can Experience Corrosion And Can Fracture, Causing Loss Of Electrical Power And Engine Shutdown.engine Shutdown, Loss Of Power Steering Assist, Or Loss Of Hydraulic Brake Boost Can Occur Which May Result In Loss Of Vehicle Control And An Accident.. Follwoing Is The Summary Of Corrective Actions Taken: Dealers Will Replace The Junction Box, Main Power Terminal The Starter Or Starter Relay And Terminals At The Existing Junction Block. The Wiring Of The Hydraulic Brake Circuit Will Also Be Modified By Bypassing The Junction Block. The New Terminals Will Be Made From An Alloy Material More Resistant To Salt Corrosion.
note: If Your Vehicle Is Presented To An Authorized Dealer On An Agreed Upon Service Date And The Remedy Is Not Provided Within A Reasonable Time And Free Ofcharge Or The Remedy Does Not Correct The Defect Or Noncompliance, Please Contact Ford Service Center At 1-800-392-3673. Also, Contact The National Highway Traffic Safety Administration’s Auto Safety Hotline At 1-800-424-9393.

This recall was issued on Mar 26, 1994 for 1994 Ford B600, manufactured by FORD MOTOR COMPANY, in response to Electrical System,battery problems.