1995 Ford Crown Victoria Recall | The Passenger Side Air Bag Has An Inflator Body That Cracked During Forming Of The Curl That Retains The Igniter Plug In The End Of The Inflator. Also The Igniter End Cap Can Separate

1995 Ford Crown Victoria Air Bags,frontal Recall | Feb 24, 1995

The Passenger Side Air Bag Has An Inflator Body That Cracked During Forming Of The Curl That Retains The Igniter Plug In The End Of The Inflator. Also The Igniter End Cap Can Separate From The Inflator.the Passenger Side Air Bag May Not Inflate Properly Resulting In Reduced Occupant Protection In A Vehicle Accident. If The Igniter End Cap Separates In A Frontal Collision, Hot Gases Can Be Released And Ignite Flammable Material Or Cause Burn Injuries.. Follwoing Is The Summary Of Corrective Actions Taken: Dealers Will Remove And Replace The Passenger Side Air Bag Module.
system: Interior; Passive Restraints; Air Bag; Passenger. Vehicle Description: Passenger Side Air Bag In Passenger Cars, Vans Andmulti-purpose Vehicles. Note: If Your Vehicle Is Presented To An Authorized Dealer On An Agreed Upon Service Date And The Remedy Is Not Provided Free Of Charge Within A Reasonable Time, Contact Ford At 1-800-392-3673. Also Contact The National Highway Traffic Safety Administration’s Auto Safety Hotline At 1-800-424-9393.

This recall was issued on Feb 24, 1995 for 1995 Ford Crown Victoria, manufactured by FORD MOTOR COMPANY, in response to Air Bags,frontal problems.

1995 Ford Crown Victoria Recall | These Vehicles Were Built With The Non-cycling Power Window Circuit Breaker And The Cycling Headlamp Circuit Breaker Interchanged.

1995 Ford Crown Victoria Electrical System,fuses And Circuit Breakers Recall | Oct 02, 1995

These Vehicles Were Built With The Non-cycling Power Window Circuit Breaker And The Cycling Headlamp Circuit Breaker Interchanged.in The Event Of A Short Or Overload In The Headlampcircuit, Both Headlamps Can Go Out Without Warning, Rather Than Flashing As Intended With The Cycling Circuit Breaker. This Could Lead To Reduced Night Time Driver Visibility, Increasing The Potential For A Vehicle Accident.. Follwoing Is The Summary Of Corrective Actions Taken: Dealers Will Inspect These Vehicles, Remove The Circuit Breaker And Reinstall The Breaker In The Correct Locations.
system: Electrical; Fuse And Recepticle; Circuit Breaker.vehicle Description: Passenger Vehicles.note: Owners Who Take Their Vehicles To An Authorized Dealer On An Agreed Upon Service Date And Do Not Receive The Free Remedy Within A Reasonable Time Should Contact Ford At 1-800-392-3673. Also Contact The National Highway Traffic Safety Administration’s Auto Safety Hotline At 1-800-424-9393.

This recall was issued on Oct 02, 1995 for 1995 Ford Crown Victoria, manufactured by FORD MOTOR COMPANY, in response to Electrical System,fuses And Circuit Breakers problems.

1995 Ford Crown Victoria Recall | The Seal Material Between The Fuel Filler Pipe And Fuel Tank May Not Have Been Fully Cured During The Molding Process Which Could Allow For Fuel Leakage.

1995 Ford Crown Victoria Fuel System, Gasoline,storage,tank Assembly,filler Pipe And Cap Recall | Mar 27, 1995

The Seal Material Between The Fuel Filler Pipe And Fuel Tank May Not Have Been Fully Cured During The Molding Process Which Could Allow For Fuel Leakage.fuel Leakage Could Result In A Vehicle Fire If An Ignition Source Were Present.. Follwoing Is The Summary Of Corrective Actions Taken: Dealers Will Replace The Fuel Filler Pipe-to-fuel Tank Seal With A New Seal Of Different Material.
system: Fuel; Fuel Tank Assembly; Pipe; Filler; Neck.vehicle Description: Passenger Vehicles.note: If Your Vehicle Is Presented To An Authorized Dealer On An Agreed Upon Service Date And The Remedy Is Not Provided Free Of Charge Within A Reasonable Time, Please Contact Ford At 1-800-392-3673. Also Contact The National Highway Traffic Safety Administration’s Auto Safety Hotline At 1-800-424-9393.

This recall was issued on Mar 27, 1995 for 1995 Ford Crown Victoria, manufactured by FORD MOTOR COMPANY, in response to Fuel System, Gasoline,storage,tank Assembly,filler Pipe And Cap problems.

1995 Ford Crown Victoria Recall | The Bolts That Attach The Front Upper Control Arms To The Frame Mounting Brackets Can Loosen And Fracture At One Of The Bolt Holes Causing Substantial Negative Camber And Steering Pull To The Affected Side.

1995 Ford Crown Victoria Suspension,front,control Arm,upper Arm Recall | Oct 11, 1995

The Bolts That Attach The Front Upper Control Arms To The Frame Mounting Brackets Can Loosen And Fracture At One Of The Bolt Holes Causing Substantial Negative Camber And Steering Pull To The Affected Side.if The Driver’s Side Bracket Fractured At Both Bolt Holes, The Steering Control Arm Can Contact The Steering Column Shaft And Result In A Loss Of Steering Control Increasing The Potential For An Accident.. Follwoing Is The Summary Of Corrective Actions Taken: Dealers Will Inspect The Torque Levels Of The Four Upper Control Arm Mounting Bolts, And If Any Are Loose, The Brackets Will Be Inspected For Damage. If Damage Is Present, It Will Be Repaired.
system: Suspension; Front Control Arm; Upper.vehicle Description: Passenger Vehicles Equipped With A Police Package Option.note: Owners Who Take Their Vehicles To An Authorized Dealer On An Agreed Upon Service Date And Do Not Receive The Free Remedy Within A Reasonable Time, Should Contact Ford At 1-800-392-3673. Also Contact The National Highway Traffic Safety Administration’s Auto Safety Hotline At 1-800-424-9393.

This recall was issued on Oct 11, 1995 for 1995 Ford Crown Victoria, manufactured by FORD MOTOR COMPANY, in response to Suspension,front,control Arm,upper Arm problems.