1995 Ford F800 Recall | The Hand Throttle Cable Can Wear The Brass Swivel Block On The Governor Lever Through Which It Passes.

1995 Ford F800 Vehicle Speed Control Recall | Aug 02, 1995

The Hand Throttle Cable Can Wear The Brass Swivel Block On The Governor Lever Through Which It Passes.this Wear Can Result In The Governor Jamming In Thedamaged Swivel And Could Prevent The Governor Lever From Returning To The Idle Position.. Follwoing Is The Summary Of Corrective Actions Taken: Dealers Will Install A Revised Governor Lever With A Stainless Steel Swivel. Also Letters Will Be Sent To Vehicle Owners That Have The Same Vehicles But Do Not Have A Ford Installed Hand Throttle Advising Them That They May Require Service If They Have Had An After Market Hand Throttle Installed.
system: Fuel; Throttle Linkages And Control.vehicle Description: Trucks, Chassis-cabs And Cowl-chassis Vehicles With Inline Fuel Injection Pump Equipped Fd-1060 Or Fd-1460 Engines And Hand Throttles.note: The Vehicle Brakes Are Capable Of Overriding The Engine Power And Bringing The Vehicle To A Stop.note: Owners Who Take Their Vehicles To An Authorized Dealer On An Agreed Upon Service Date And Do Not Receive The Free Remedy Within A Reasonablet Ime, Should Contact Ford At 1-800-392-3673. Also Contact The National Highway Traffic Safety Administration’s Auto Safety Hotline At 1-800-424-9393.

This recall was issued on Aug 02, 1995 for 1995 Ford F800, manufactured by FORD MOTOR COMPANY, in response to Vehicle Speed Control problems.

1995 Ford F800 Recall | A Connector In The Wiring Where The Tilt Hood Mounted Lamps Attach To The Vehicle Wiring Harness Was Built Without Sealing Plugs. Moisture, Road Salt Or Other Contaminants Can Enter The Connection Resulting

1995 Ford F800 Electrical System,wiring Recall | May 09, 1995

A Connector In The Wiring Where The Tilt Hood Mounted Lamps Attach To The Vehicle Wiring Harness Was Built Without Sealing Plugs. Moisture, Road Salt Or Other Contaminants Can Enter The Connection Resulting In Crossed Circuits, Shorts Or Corrosion Of The Wiring Of The Connector.the Headlamps Or Other Front-end Lighting Systems Can Malfunction As A Result Of This Condition Increasing The Potential For A Vehicle Accident.. Follwoing Is The Summary Of Corrective Actions Taken: Dealers Will Inspect The Connector And Install Sealing Plugs In The Open Cavities. If The Inspection Reveals Corrosion, A New Connector Will Be Installed.
system: Electrical; Wiring; Other Part.vehicle Description: Light And Medium Duty Trucks, Chassis-cabs And Cowl-chassis.note: If Your Vehicle Is Presented To An Authorized Dealer On An Agreed Up0n Service Date And The Remedy Is Not Provided Free Of Charge Within A Reasonable Time, Please Contact Ford At 1-800-392-3673. Also Contact The National Highway Traffic Safety Administration’s Auto Safety Hotline At 1-800-424-9393.

This recall was issued on May 09, 1995 for 1995 Ford F800, manufactured by FORD MOTOR COMPANY, in response to Electrical System,wiring problems.

1995 Ford F800 Recall | Air System Blockage In The Air Dryer Occurs Degrading The Moisture Removing Capabilities Of The Dryer When The Vehicle Is Operated In A Cold Environment And Moisture Accumulates And Freezes In The Air Dryer Or

1995 Ford F800 Service Brakes, Air,supply,hoses, Lines/piping, And Fittings Recall | June 13, 1995

Air System Blockage In The Air Dryer Occurs Degrading The Moisture Removing Capabilities Of The Dryer When The Vehicle Is Operated In A Cold Environment And Moisture Accumulates And Freezes In The Air Dryer Or In The Line Between The Dryer And The Air System Reservoir. The Air Dryer Can Become Overpressurized Causing The Air Dryer Cartridge To Separate From The Mounting Base.if The Air Dryer Separates From The Base, The Cartridge Can Separate Sufficiently Enough To Cause Personal Injury Or Property Damage.. Follwoing Is The Summary Of Corrective Actions Taken: Dealers Will Equip Air Systems With A Pressure Relief Valve To Be Located Between The Compressor And The Air Dryer. This Pressure Relief Valve Is Intended To Vent If Excessive Pressure Develops In The Air Dryer.
system: Brakes; Air Dryer.vehicle Description: Trucks And Chassis-cab Vehicles Equipped With Air Brakes And Rockwell Wabco System Saver “1000” Air Dryer.note: If Your Vehicle Is Presented To An Authorized Dealer On An Agreed Upon Service Date And The Remedy Is Not Provided Free Of Charge Within A Reasonable Time, Contact Rockwell Wabco At 1-800-535-5560 Or Ford At 1-800-392-3673. Also Contact The National Highway Traffic Safety Administration’s Auto Safety Hotline At 1-800-424-9393.

This recall was issued on June 13, 1995 for 1995 Ford F800, manufactured by FORD MOTOR COMPANY, in response to Service Brakes, Air,supply,hoses, Lines/piping, And Fittings problems.