2000 Ford Contour Recall | Vehicle Description: Passenger Vehicles, Light Duty Trucks, Sport Utility

2000 Ford Contour Seat Belts Recall | Aug 18, 2000

Vehicle Description: Passenger Vehicles, Light Duty Trucks, Sport Utility Vehicles, And Mini Vans Equipped With Trw Seat Belt Buckle Assemblies. The Buckle Base Of These Seat Belt Assemblies Were Not Properly Heat Treated And Therefore Do Not Pass The Load Bearing Requirement Of Federal Motor Vehicle Safety Standard No. 209, “seat Belt Assemblies.”

In The Event Of A Vehicle Crash, The Occupant May Not Be Properly Restrained.

Summary Of Corrective Actions Taken: Dealers Will Inspect The Date Code On Certain Seat Belt Buckles Of Your Vehicle And Replace All Seat Belt Buckles That Fall Within The Suspect Date Code Range. Owner Notification Began October 26, 2000. Owners Who Take Their Vehicles To An Authorized Dealer On An Agreed Upon Service Date And Do Not Receive The Free Remedy Within A Reasonable Time Should Contact Ford At 1-800-392-3673.

Also Contact The National Highway Traffic Safety Administration’s Auto Safety Hotline At 1-888-dash-2-dot (1-888-327-4236).

This recall was issued on Aug 18, 2000 for 2000 Ford Contour, manufactured by FORD MOTOR COMPANY, in response to Seat Belts problems.

2008 Ford Contour Recall | Federal Mogul Is Recalling 6,903 Aftermarket Ball Joint Assemblies Shipped Between

2008 Ford Contour Suspension Recall | Apr 14, 2008

Federal Mogul Is Recalling 6,903 Aftermarket Ball Joint Assemblies Shipped Between November 9, 2007 And March 26, 2008, Which May Have Been Packaged With Incorrect Nuts. The Part Numbers Packaged With Incorrect Nuts Are: K7147, K7329, K8683, And 104353. These Parts Were Made For Use On The Various Vehicles Listed Above.

The Nuts Included In The Packaging For These Ball Joint Assemblies Are Missing The Intended Prevailing Torque (self-locking) Feature. If The Incorrect Nut Was To Become Loose, The Joining Members May Loosen Leading To A Separation Of The Ball Joint. This May Result In Loss Of Vehicle Control, Possibly Resulting In A Vehicle Crash.

Summary Of Corrective Actions Taken: Federal Mogul Will Notify Owners And Replace The Parts Free Of Charge. The Recall Began On May 22, 2008. Owners Can Contact Federal Mogul At 877-489-6659.

This Recall Only Pertains To Aftermarket Ball Joint Assemblies And Has No Relation To Any Original Equipment Installed On Vehicles Manufactured By The Vehicle Manufacturers.customers May Contact The National Highway Traffic Safety Administration’s Vehicle Safety Hotline At 1-888-327-4236 (tty: 1-800-424-9153); Or Go To Http://www.safercar.gov.

This recall was issued on Apr 14, 2008 for 2008 Ford Contour, manufactured by FEDERAL-MOGUL CHASSIS PRODUCTS, in response to Suspension problems.

2000 Ford Contour Recall | Vehicle Description: Passenger Vehicles Not Equipped With The Anti-lock Braking System

2000 Ford Contour Service Brakes, Hydraulic,foundation Components Recall | Mar 09, 2000

Vehicle Description: Passenger Vehicles Not Equipped With The Anti-lock Braking System (abs). A Pressure Conscious Reducing Valve (pcrv) In The Rear Brakes May Be Subject To Corrosion And Result In Malfunction, When Operated In Areas That Use Salt Compounds On The Roadway For De-icing Or Dust Control.

If Both Pcrv’s Malfunction, Vehicle Handling Could Be Adversely Affected During Braking As A Result Of The Rear Wheels Locking, Increasing The Risk Of A Crash.

Summary Of Corrective Actions Taken: Dealers Will Install Improved Pcrv’s In The Rear Brake System. This Recall Was Expanded In September 2000 To Include 1999 And 2000 Ford Contour, Mercury Mystique And Cougar Vehicles.

Owner Notification Began April 3, 2000 For The 1996-1998 Model Vehicles And On October 11, 2000, For The 1999-2000 Model Vehicles.owners Who Take Their Vehicles To An Authorized Dealer On An Agreed Upon Service Date And Do Not Receive The Free Remedy Within A Reasonable Time Should Contact Ford At 1-800-392-3673. Also Contact The National Highway Traffic Safety Administration’s Auto Safety Hotline At 1-888-dash-2-dot (1-888-327-4236).

This recall was issued on Mar 09, 2000 for 2000 Ford Contour, manufactured by FORD MOTOR COMPANY, in response to Service Brakes, Hydraulic,foundation Components problems.

2000 Ford Contour Recall | Vehicle Description: Bi-fuel Vehicles. These Vehicles May Have A

2000 Ford Contour Fuel System, Other,storage,tank Assembly Recall | Oct 30, 2000

Vehicle Description: Bi-fuel Vehicles. These Vehicles May Have A Fuel Tank Filler Pipe Grommet That Could Have Been Damaged During The Installation Of The Bi-fuel System. If The Grommet Is Damaged, Fuel Could Leak. Fuel Leakage In The Presence Of An Ignition Source Could Result In A Fire. Dealers Will Replace The Fuel Tank Filler Pipe Grommet.

If The Grommet Is Damaged, Fuel Could Leak. Fuel Leakage In The Presence Of An Ignition Source Could Result In A Fire.

Summary Of Corrective Actions Taken: Dealers Will Replace The Fuel Tank Filler Pipe Grommet.

Owner Notification Began November 30, 2000.owners Who Take Their Vehicles To An Authorized Dealer On An Agreed Upon Service Date And Do Not Receive The Free Remedy Within A Reasonable Time Should Contact Ford At 1-800-392-3673.also Contact The National Highway Traffic Safety Administration’s Auto Safety Hotline At 1-888-dash-2-dot (1-888-327-4236).

This recall was issued on Oct 30, 2000 for 2000 Ford Contour, manufactured by FORD MOTOR COMPANY, in response to Fuel System, Other,storage,tank Assembly problems.

2000 Ford Contour Recall | Vehicle Description: 1995 Passenger Vehicles Equipped With The 2.0l And

2000 Ford Contour Engine And Engine Cooling Recall | Nov 06, 2000

Vehicle Description: 1995 Passenger Vehicles Equipped With The 2.0l And 2.5l Engines, And 1996 Vehicles Equipped With 2.5l Engines. Tightening Of The Engine Cooling Fan Motor Bearings, Up To And Including Motor Stall, Can Result In Increased Motor Torque And Higher Than Normal Motor Current And Accompanying High Motor Temperatures.

Overheating Of The Cooling Fan Motor Due To Excessive Current Can Result In Smoke And Odors From Bearing Grease, Insulation And Other Internal Motor Components. If Electrical Current Continues To Be Applied To The Motor, Internal Motor Components Could Ignite Possibly Igniting Other Engine Compartment Components.

Summary Of Corrective Actions Taken: Dealers Will Install A Positive Temperature Coefficient Device In-line With Each Fan Motor. Ford Will Also Extend The Warranty On The Engine Cooling Fan Assembly To A Total Of 8 Years Of Service Or 100,000 Miles From The Warranty Start Date, Whichever Occurs First. If The Vehicle Already Has More Than 100,000 Miles, This Coverage Will Last Until July 31, 2001.

Owner Notification Began February 5, 2001. Owners Who Take Their Vehicles To An Authorized Dealer On An Agreed Upon Service Date And Do Not Receive The Free Remedy Within A Reasonable Time Should Contact Ford At 1-800-392-3673. Also Contact The National Highway Traffic Safety Administration’s Auto Safety Hotline At 1-888-dash-2-dot (1-888-327-4236).

This recall was issued on Nov 06, 2000 for 2000 Ford Contour, manufactured by FORD MOTOR COMPANY, in response to Engine And Engine Cooling problems.

2001 Ford Contour Recall | On Certain My 1996-1998 Passenger Vehicles Built At The Kansas City,

2001 Ford Contour Electrical System Recall | July 09, 2001

On Certain My 1996-1998 Passenger Vehicles Built At The Kansas City, Cuautitlan Assembly Plants Or On My 1999 Passenger Vehcles Built At The Automotive Alliance International Assembly Plants, The Rough Surface Of The Heater Blower Resistor’s Stainless Steel Blades Can Damage The Copper Surface Of The Wiring Harness Connector. The Damage Could, Over Time, Cause Increased Resistance In The Connector And, Due To Subsequent Terminal Relaxation, Result In An Open Circuit Condition.

The Open Circuit Could Lead To Electrical Arcing That Could Melt The Connector Housing Material Creasing The Potential For A Fire.

Summary Of Corrective Actions Taken: Dealers Will Install A New Heater Blower Resistor And A New Wire Jumper Harness. Owner Notification Began August 29, 2001. Owners Who Take Their Vehicles To An Authorized Dealer On An Agreed Upon Service Date And Do Not Receive The Free Remedy Within A Reasonable Time Should Contact Ford At 1-800-392-3673.

Ford Recall No.01s22.also Contact The National Highway Traffic Safety Administration’s Auto Safety Hotline At 1-888-dash-2-dot (1-888-327-4236).

This recall was issued on July 09, 2001 for 2001 Ford Contour, manufactured by FORD MOTOR COMPANY, in response to Electrical System problems.

2001 Ford Contour Recall | Vehicle Description: Passenger Vehicles Built With An Incorrect Power Brake Booster

2001 Ford Contour Service Brakes, Hydraulic,power Assist,vacuum Recall | Feb 14, 2001

Vehicle Description: Passenger Vehicles Built With An Incorrect Power Brake Booster And Master Cylinder Assembly.

If Either The Master Cylinder Or Power Brake Booster Is Subsequently Serviced With Only One Of The Correct Brake Booster Or Master Cylinder Parts, Brake Performance Would Be Reduced.

Summary Of Corrective Actions Taken: Dealers Will Install The Correct Contour Brake Booster And Master Cylinder In Each Of These Vehicles. Owner Notification Began January 28, 2002. Owners Who Take Their Vehicles To An Authorized Dealer On An Agreed Upon Service Date And Do Not Receive The Free Remedy Within A Reasonable Time Should Contact Ford At 1-866-436-7332.

Customers Can Also Contact The National Highway Traffic Safety Administration’s Auto Safety Hotline At 1-888-dash-2-dot (1-888-327-4236).

This recall was issued on Feb 14, 2001 for 2001 Ford Contour, manufactured by FORD MOTOR COMPANY, in response to Service Brakes, Hydraulic,power Assist,vacuum problems.

2006 Ford Contour Recall | Certain Aftermarket Brake Hydraulic Master Cylinders Sold As Replacement Brake Cylinders For

2006 Ford Contour Service Brakes, Hydraulic Recall | Mar 13, 2006

Certain Aftermarket Brake Hydraulic Master Cylinders Sold As Replacement Brake Cylinders For Certain Ford, Daimlerchrysler, And Jeep Passenger Vehicles. These Brake Cylinders Were Sold Under The Brand Names Of Napa, Raybestos, Aimco, Ac Delco, Carquest, Bendix, And Wagner. Only Products That Were Manufactured From July 27, 2005 Through January 17, 2006 (date Codes 0529 Through 0602) Are Subject To This Recall. When Subject To Very Cold Temperatures, An Internal Seal In The Master Cylinder Could Lose Flexibility And May Cause Brake Fluid To Leak.

Loss Of Brake Fluid Can Lead To A Decrease In Brake Line Pressure And An Increase In Stopping Distance, Which Can Result In A Vehicle Crash.

Summary Of Corrective Actions Taken: Affinia (brake Parts, Inc.) Will Replace The Subject Brake Hydraulic Master Cylinders Free Of Charge. The Recall Began On March 20, 2006. Owners Can Contact Affina Group Customer Service At 1-800-323-0354.

This Recall Only Pertains To Aftermarket Napa, Raybestos, Ac Delco, Aimco, Carquest, And Bendix Brake Hydraulic Master Cylinders And Has No Relation To Any Original Equipment Installed On Daimlerchrysler Or Ford Vehicles.customers May Contact The National Highway Traffic Safety Administration’s Vehicle Safety Hotline At 1-888-327-4236 (tty: 1-800-424-9153); Or Go To Http://www.safercar.gov.

This recall was issued on Mar 13, 2006 for 2006 Ford Contour, manufactured by BRAKE PARTS, INC., in response to Service Brakes, Hydraulic problems.

2001 Ford Contour Recall | This Is Not A Safety Recall In Accordance With The Safety

2001 Ford Contour Visibility,defroster/defogger System,windshield,controls/wiring Recall | July 09, 2001

This Is Not A Safety Recall In Accordance With The Safety Act. However, It Is Deemed A Safety Improvement Campaign By The Agency. Vehicle Description: 1995-1997 Ford Contour And Mercury Mystique Vehicles. The Heater Blower Resistor Could Overheat Causing The Attached Electrical Connector To Melt.

This Could Create The Potential For A Fire.

Summary Of Corrective Actions Taken: Ford Will Provide Additional Warranty Coverage For The Heater Blower Switch For 10 Years From Original Date Of Sale Of The Vehicle Or 150,000 Miles, Whichever Comes First. Dealers Will Install A New Heater Blower Resistor And A New Wire Jumper Harness Free Of Charge.

Ford Has Decided To Conduct An Extended Coverage Program To Extend The Warranty Coverage For Potential Heather Blower Resistor Problems. Owners Can Contact Ford At1-866-436-7332, Concerning This Program.

This recall was issued on July 09, 2001 for 2001 Ford Contour, manufactured by FORD MOTOR COMPANY, in response to Visibility,defroster/defogger System,windshield,controls/wiring problems.

2001 Ford Contour Recall | This Is Not A Safety Recall In Accordance With The Safety Act.

2001 Ford Contour Suspension,front,springs,coil Springs Recall | Aug 08, 2001

This Is Not A Safety Recall In Accordance With The Safety Act. However, It Is Deemed A Safety Improvement Campaign By The Agency. Vehicle Description: 1998 Ford Contour/mercury Mystique Passenger Vehicles Built At The Kansas City Assembly Plant. The Front Coil Springs Could Potentially Fracture Due To Corrosion.

Some Tires Have Deflated Due To Contact With A Broken Spring.

Summary Of Corrective Actions Taken: Ford Is Extending The Warranty For Front Coil Spring Replacement For The Front Coil Springs For 10 Years From Original Date Of Sale Of A Vehicle Or 150,000 Miles, Whichever Comes First.

Ford Has Decided To Conduct A Service Campaign To Extend The Warranty Coverage For The Front Coil Springs. Owners Can Contact Ford At1-866-436-7332, Concerning This Program.

This recall was issued on Aug 08, 2001 for 2001 Ford Contour, manufactured by FORD MOTOR COMPANY, in response to Suspension,front,springs,coil Springs problems.