2008 Ford E250 Recall | Mobilityworks Is Recalling 133 My 2005-2006 Ford E250, My 2000,

2008 Ford E250 Equipment Adaptive Recall | Oct 06, 2008

Mobilityworks Is Recalling 133 My 2005-2006 Ford E250, My 2000, 2004-2006 E350, My 2000, 2005 E450, My 2005-2006 Gmc 2500, Gmc 3500, And My 2006 Dodge 2500 Vans Equipped With Ricon Platform Style Wheelchair Lifts. These Lifts Fail To Comply With The Requirements Of Federal Motor Vehicle Safety Standard No. 403, “platform Lift Systems For Motor Vehicles.” The Anti-stow Interlock May Not Detect The Presence Of A Wheelchair Or Mobility Aid User. The Pressure Sensing Switch That Detects The Presence Of Weight On The Platform Was Not Adjusted To The Necessary Sensitivity Level. The Lift Could Stow Even Though Someone Or Something Is Still On The Lift.

A Lift Occupant Can Be Injured Should The Lift Begin To Stow Unintentionally.

Summary Of Corrective Actions Taken: Mobilityworks Is Working With Ricon To Correct The Wheelchair Lifts Free Of Charge (please See 07e097). Owners May Contact Ricon At 1-818-267-3000 Or Mobilityworks At 1-800-769-8267.

Customers May Also Contact The National Highway Traffic Safety Administration’s Vehicle Safety Hotline At 1-888-327-4236 (tty 1-800-424-9153), Or Go To Http://www.safercar.gov.

This recall was issued on Oct 06, 2008 for 2008 Ford E250, manufactured by MOBILITY WORKS, in response to Equipment Adaptive problems.

2007 Ford E250 Recall | Certain Federal-mogul Aftermarket Fuel Pumps Sold Under The Brand Names Of Carter,

2007 Ford E250 Fuel System, Gasoline,delivery,fuel Pump Recall | Aug 27, 2007

Certain Federal-mogul Aftermarket Fuel Pumps Sold Under The Brand Names Of Carter, Accuflow, Napa, Truflow, Parts Depo, And Parts Master, Shipped Between August 2006 And July 2007 For Use On The Vehicles Listed Above. The Fuel Pump Diaphragm In Certain Production Runs May Have Been Improperly Installed Or Inadequately Tested Which May Cause The Fuel Pump To Leak.

A Leaking Fuel Pump Could Create A Vehicle Fire Hazard.

Summary Of Corrective Actions Taken: Federal-mogul Will Notify Owners And Replace The Defective Fuel Pumps Free Of Charge. The Recall Began On October 15, 2007. Owners Can Contact Federal-mogul At 248-354-7700.

This Recall Only Pertains To Aftermarket Carter, Napa, Accuflow, Tru Flow, Parts Master, And Parts Depot Brand Fuel Pumps And Has No Relation To Any Original Equipment Installed On The Listed Motor Vehicles.customers May Contact The National Highway Traffic Safety Administration’s Vehicle Safety Hotline At 1-888-327-4236 (tty: 1-800-424-9153); Or Go To Http://www.safercar.gov.

This recall was issued on Aug 27, 2007 for 2007 Ford E250, manufactured by FEDERAL-MOGUL CORPORATION, in response to Fuel System, Gasoline,delivery,fuel Pump problems.

2004 Ford E250 Recall | On Certain Vans Equipped With Sure-lok Wheelchair Securement Systems, The Sprocket

2004 Ford E250 Equipment Adaptive Recall | Nov 26, 2004

On Certain Vans Equipped With Sure-lok Wheelchair Securement Systems, The Sprocket Teeth Of The Retractor Assembly Is Out Of Alignment.

In The Event Of A Vehicle Crash, The Wheelchair May Not Be Adequately Secured Possibly Resulting In Injuries To A Wheelchair Occupant.

Summary Of Corrective Actions Taken: Dealers Will Inspect And Replace The Wheelchair Securement Retractors As Necessary. Sure-lok Will Handle The Repairs For This Campaign. Owners Should Contact Sure-lock At 1-908-231-1804 Or Mobilityworks At 1-800-769-8267.

Sure-lok Recall No. 04e-058.customers Can Also Contact The National Highway Traffic Safety Administration’s Auto Safety Hotline At 1-888-dash-2-dot (1-888-327-4236).

This recall was issued on Nov 26, 2004 for 2004 Ford E250, manufactured by MOBILITY WORKS, in response to Equipment Adaptive problems.

2004 Ford E250 Recall | On Certain Vans Built On Ford E250/e350 Chassis And Equipped With Sure-lok

2004 Ford E250 Equipment Adaptive Recall | Dec 15, 2004

On Certain Vans Built On Ford E250/e350 Chassis And Equipped With Sure-lok Wheelchair Securement Systems, The Sprocket Teeth Of The Retractor Assembly Is Out Of Alignment.

In The Event Of A Vehicle Crash, The Wheelchair May Not Be Adequately Secured Possibly Resulting In Injuries To A Wheelchair Occupant.

Summary Of Corrective Actions Taken: Dealers Will Inspect And Replace The Wheelchair Securement Retractors As Necessary. Sure-lok Is Conducting The Owner Notification And Remedy For This Campaign. Owners Should Contact Sure-lock At 1-908-231-1804 Or Accubuilt At 419-222-1501.

Customers Can Also Contact The National Highway Traffic Safety Administration’s Auto Safety Hotline At 1-888-dash-2-dot (1-888-327-4236).

This recall was issued on Dec 15, 2004 for 2004 Ford E250, manufactured by ACCUBUILT, INC., in response to Equipment Adaptive problems.

1979 Ford E250 Recall | The Incorrectly Installed Left Front Brake Hoses May Allow For Contact Between The Front Brake Hoses And The Front Tires When The Front Wheels Are In Full Right Or Left Turn Positions. If Contact

1979 Ford E250 Service Brakes, Hydraulic,foundation Components,hoses, Lines/piping, And Fittings Recall | June 19, 1979

The Incorrectly Installed Left Front Brake Hoses May Allow For Contact Between The Front Brake Hoses And The Front Tires When The Front Wheels Are In Full Right Or Left Turn Positions. If Contact Is Made, The Hose Could Wear And Allow Brake Fluid To Leak Out.. Follwoing Is The Summary Of Corrective Actions Taken: The Dealer Will Inspect Front Brake Hoses And Replace Those Lacking The Proper Clearance With Current Production Hoses, Without Charge To Owner.
vehicle Description: Trucks.system: Service Brakes; Front Brake Hoses.consequences Of Defect: Front Wheel Braking Capability Could Be Lost, Causingan Increase In Stopping Distances And, Possibly, An Accident.note: Operator May Be Alerted To Loss Of Front Brakes By The Activation Of Awarning Light. Should This Light Appear, Proceed With Caution And Have Thevehicle Serviced Immediately.

This recall was issued on June 19, 1979 for 1979 Ford E250, manufactured by FORD MOTOR COMPANY, in response to Service Brakes, Hydraulic,foundation Components,hoses, Lines/piping, And Fittings problems.

1982 Ford E250 Recall | Some Of The Involved Vehicles May Have A Diode In The Electrical Fuel Pump Circuit That May Short During Engine Starting Due To Inadequate Capacity To Withstand Current Draw. A Short Circuit Would Result

1982 Ford E250 Fuel System, Gasoline,delivery,fuel Pump Recall | Dec 13, 1982

Some Of The Involved Vehicles May Have A Diode In The Electrical Fuel Pump Circuit That May Short During Engine Starting Due To Inadequate Capacity To Withstand Current Draw. A Short Circuit Would Result In Normal Engine Starting, But The Pump Will Not Continue To Supply The Engine With Fuel.. Follwoing Is The Summary Of Corrective Actions Taken: The Dealer Will Replace Defective Element In The Electrical Fuel Pump Circuit With A New Relay Feed Wiring Assembly Which Contains A Larger Capacity Diode, Free Of Charge.
vehicle Description: Light Trucks And Multipurpose Passenger Vehicles.system: Fuel; Fuel Pump.consequences Of Defect: Under Such Circumstances, A Vehicle May Stall Withoutprior Warning, Creating The Potential For A Vehicle Accident. (vehicle Willrestart But Will Stall Again In 5 To 10 Seconds).

This recall was issued on Dec 13, 1982 for 1982 Ford E250, manufactured by FORD MOTOR COMPANY, in response to Fuel System, Gasoline,delivery,fuel Pump problems.

1979 Ford E250 Recall | Certain Vehicles May Not Contain The Specified Body Mounted Heat Shields. This Could Cause High Floor Pan Temperatures When The Engine Is Idled For Extended Periods Of Time. Fouled Spark Plugs Or Other

1979 Ford E250 Structure, Frame And Members,underbody Shields Recall | June 19, 1979

Certain Vehicles May Not Contain The Specified Body Mounted Heat Shields. This Could Cause High Floor Pan Temperatures When The Engine Is Idled For Extended Periods Of Time. Fouled Spark Plugs Or Other Engine Conditions Could Further Increase Exhaust Temperatures.. Follwoing Is The Summary Of Corrective Actions Taken: The Dealer Will Install The Necessary Frame Mounted Heat Shield, If Missing.
vehicle Description: Trucks Equipped With 300 And 460 Cid Engines.system: Exhaust; Body Mounted Heat Shields.consequences Of Defect: These High Temperatures Could Cause The Rear Floorcoverings To Smoulder, Resulting In Smoke Damage And Personal Injury.

This recall was issued on June 19, 1979 for 1979 Ford E250, manufactured by FORD MOTOR COMPANY, in response to Structure, Frame And Members,underbody Shields problems.

1980 Ford E250 Recall | Due To Computer Input Error Which Resulted In An Incorrect Build Schedule, Some Vehicles Were Shipped Without The Required Exhaust System Heat Shields. When The Vehicle Is Idled Over An Extended Period Of

1980 Ford E250 Engine And Engine Cooling,exhaust System Recall | July 14, 1980

Due To Computer Input Error Which Resulted In An Incorrect Build Schedule, Some Vehicles Were Shipped Without The Required Exhaust System Heat Shields. When The Vehicle Is Idled Over An Extended Period Of Time, A Missing Exhaust Heat Shield May Result In Dangerously High Floor Pan Temperatures.. Follwoing Is The Summary Of Corrective Actions Taken: Dealer Will Install Frame-mounting Heat Shields Without Charge To Owner.
vehicle Description: Trucks (vans) Equipped With 300 Or 302 Cid Engines.system: Exhaust; Heat Shields.consequences Of Defect: This Could Result In Personal Injury To Passengers Orheat Damage To Items Stored On The Floor Of The Vehicle.

This recall was issued on July 14, 1980 for 1980 Ford E250, manufactured by FORD MOTOR COMPANY, in response to Engine And Engine Cooling,exhaust System problems.

1977 Ford E250 Recall | On The Involved Vehicles, The Park Actuation Support Plates Are Defective Due To Their Susceptibility To Cracking Due To Improper Heat Treatment During Manufacture. As A Result, Fragments From A Broken Plate

1977 Ford E250 Power Train,automatic Transmission,lever And Linkage,column Shift Recall | Oct 25, 1977

On The Involved Vehicles, The Park Actuation Support Plates Are Defective Due To Their Susceptibility To Cracking Due To Improper Heat Treatment During Manufacture. As A Result, Fragments From A Broken Plate Can Become Lodged In The Transmission Parking Pawl Mechanism. This Could Prevent The Transmission Parking Pawl From Engaging When The Selector Lever Is Placed In The “park” Position, Or Prevent The Pawl From Being Disengaged From The Park Gear.. Follwoing Is The Summary Of Corrective Actions Taken: The Dealer Will Replace The Park Actuation Cam Support Plates, Free Of Charge, On All Affected Vehicles.
vehicle Description: Passenger Vehicles And Light Trucks Equipped With C-6automatic Transmissions.system: Power Train; Park Actuation Gear Support Plates.consequences Of Defect: If The Vehicle Is Placed In The Park Mode Without Theparking Brake Engaged, The Parking Pawl May Not Engage The “park” Gear And Thevehicle Would Be Allowed To Roll Free Causing Property Damage And Personalinjuries.

This recall was issued on Oct 25, 1977 for 1977 Ford E250, manufactured by FORD MOTOR COMPANY, in response to Power Train,automatic Transmission,lever And Linkage,column Shift problems.

1977 Ford E250 Recall | On The Involved Vehicles, Leakage May Occur At The Threaded Carburetor-to-fuel Filter Connection On The Suspect Carburetors. This Is Due To An Improperly Machined Carburetor Fuel Inlet Connection.

1977 Ford E250 Fuel System, Gasoline,carburetor System Recall | Nov 15, 1977

On The Involved Vehicles, Leakage May Occur At The Threaded Carburetor-to-fuel Filter Connection On The Suspect Carburetors. This Is Due To An Improperly Machined Carburetor Fuel Inlet Connection.. Follwoing Is The Summary Of Corrective Actions Taken: Dealer Will Inspect And, If Necessary, Will Replace The Carburetor Without Charge To Owner.
vehicle Description: Light Trucks Equipped With 300 Cid Engines.system: Fuel; Carburetor.consequences Of Defect: If An Ignition Source Is Present When Fuel Leakageoccurs, A Fire Could Start And Cause Engine Damage And Serious Injury Tovehicle Occupants.note: Fuel Odors May Indicate A Leak.

This recall was issued on Nov 15, 1977 for 1977 Ford E250, manufactured by FORD MOTOR COMPANY, in response to Fuel System, Gasoline,carburetor System problems.