2003 Ford F Series Recall | Certain Pickup Truck, Van, And Mini Van Conversions Equipped With

2003 Ford F Series Structure Recall | Mar 07, 2003

Certain Pickup Truck, Van, And Mini Van Conversions Equipped With Southern Comfort Built Running Boards That Contain Certain Courtesy Lights Manufactured By American Technology Components, Inc. These Units Contain A Courtesy Light Or Lights That Might Overheat When The Wire Harness Is Exposed To Excessive Moisture And Road Salt.

This Overheating Condition Can Cause The Running Board To Melt Or Cause A Fire.

Summary Of Corrective Actions Taken: Dealers Will Replace The Wiring Harness On These Running Boards. Owner Notification Began March 7, 2003. Owners Who Take Their Vehicles To An Authorized Dealer On An Agreed Upon Service Date And Do Not Receive The Free Remedy Within A Reasonable Time Should Contact Southern Comfort At 1-800-745-6096.

Customers Can Also Contact The National Highway Traffic Safety Administration’s Auto Safety Hotline At 1-888-dash-2-dot (1-888-327-4236).

This recall was issued on Mar 07, 2003 for 2003 Ford F Series, manufactured by SOUTHERN COMFORT CONVERSIONS, in response to Structure problems.

1976 Ford F Series Recall |

1976 Ford F Series Suspension,front,springs,leaf Spring Assembly,hanger,bracket Recall | Mar 03, 1976

. Follwoing Is The Summary Of Corrective Actions Taken:
ford Campaign No 185.1974, 1975 B Series And 1975 F Series.trucks And Buschassis.possibility That The Front Spring Hanger Bracket On Which The Channeland Side Plate Components Are Insufficient Secured With Upset Rivets.if Thiscondition Exists, Brackets Installed On Vehicles With Frame Reinforcements Atthe Location Of Bracket Attachment Could Become Loose And Crack In Severe Dutyservice.this Cracking May Result In Complete Separation Of Bracket Fromframe.this,in Turn, Could Allow Front Axle Displacement Or Separationfromvehicle With Loss Of Steering Control With Little Or No Warning To Driver.in Addition, Ford Parts And Service Division Has Reported Sales Ofapproximately 1,500 Suspect Spring Hanger Brackets As Replacement Parts For1967 Through 1973 Model B-series Vehicles.(correct By Inspecting Andreplacing Hanger Brackets With New Fmvss 121 Level Components Using Specialbolts Instead Of Rivets).

This recall was issued on Mar 03, 1976 for 1976 Ford F Series, manufactured by FORD MOTOR COMPANY, in response to Suspension,front,springs,leaf Spring Assembly,hanger,bracket problems.

1977 Ford F Series Recall | The Involved Vehicles Are Equipped With Safety Compliance Certification Labels And Incomplete Vehicle Documents That Indicate That The Gross Axle Weight Rating (gawr) Is Approximately 0.6 To 6.0 Percent Greater Than The Combined

1977 Ford F Series Tires,markings Recall | Oct 25, 1977

The Involved Vehicles Are Equipped With Safety Compliance Certification Labels And Incomplete Vehicle Documents That Indicate That The Gross Axle Weight Rating (gawr) Is Approximately 0.6 To 6.0 Percent Greater Than The Combined Load Capacity Of The Tires At The Specified Tire Inflation Pressure. This Fails To Comply With Federal Motor Vehicle Safety Standard Nos. 120, “air Brake Systems”, And 119, “new Pneumatic Tires For Vehicles Other Than Passenger Cars”, Or 109, “new Pneumatic Tires”.. Follwoing Is The Summary Of Corrective Actions Taken: Owner Will Receive Correct Labels By Mail, Free Of Charge.
vehicle Description: Light Trucks.system: Equipment; Certification Label, Tire Markings.consequences Of Defect: Loading Vehicle To The Rated Capacity Could Lead Totire Failure, Rapid Loss Of Air, Loss Of Vehicle Control And An Accident.

This recall was issued on Oct 25, 1977 for 1977 Ford F Series, manufactured by FORD MOTOR COMPANY, in response to Tires,markings problems.

1979 Ford F Series Recall | Certain Air Brake Anti-lock Modulators Could Malfunction During Operation Of The Anti-lock System. A Nylon Piston Within The Modulator Air Valve System Can Swell From Exposure To System Contaminants. Continued Exposure May Cause

1979 Ford F Series Service Brakes, Air,antilock,control Unit/module Recall | Mar 29, 1979

Certain Air Brake Anti-lock Modulators Could Malfunction During Operation Of The Anti-lock System. A Nylon Piston Within The Modulator Air Valve System Can Swell From Exposure To System Contaminants. Continued Exposure May Cause The Piston To Swell To The Extent That Interference With The Cylinder Wall Will Result, Causing Momentary Sticking Or A Permanent Jam. This Can Result In Temporary Or Permanent Loss Of Braking For The Affected Axle.. Follwoing Is The Summary Of Corrective Actions Taken: The Pistons In The Valve Portion Of The Modulators Will Be Replaced With Pistons That Do Not Swell When Exposed To Air Brake System Contaminants.
vehicle Description: Heavy Trucks Equipped With Anti-lock Air Brakecontrollers.system: Service Brakes; Control Assembly.

This recall was issued on Mar 29, 1979 for 1979 Ford F Series, manufactured by FORD MOTOR COMPANY, in response to Service Brakes, Air,antilock,control Unit/module problems.

1978 Ford F Series Recall | The Engine Cooling Fan Blades May Crack And Chip Due To High Stresses Caused By Vibrations. The Chipped Pieces Of The Blade Could Fly Into The Underhood Components. Also, These Pieces Could

1978 Ford F Series Engine And Engine Cooling,cooling System,fan Recall | July 03, 1978

The Engine Cooling Fan Blades May Crack And Chip Due To High Stresses Caused By Vibrations. The Chipped Pieces Of The Blade Could Fly Into The Underhood Components. Also, These Pieces Could Fly Out From The Vehicle If The Hood Is Open And The Engine Is Running.. Follwoing Is The Summary Of Corrective Actions Taken: The Dealer Will Replace The Existing Fan Blade Assembly With One Of Another Design At No Cost To Owner.
vehicle Description: Heavy Trucks.system: Engine Cooling; Fans.consequences Of Defect: The Blade Fragments Could Cause Engine Damage And, Ifhood Is Open, Serious Personal Injury To Nearby Persons.

This recall was issued on July 03, 1978 for 1978 Ford F Series, manufactured by FORD MOTOR COMPANY, in response to Engine And Engine Cooling,cooling System,fan problems.

1978 Ford F-series Recall | The Involved Vehicles Were Assembled Without The Intended Windshield Weatherstrip Lower Retainer. These Vehicles Fail To Comply With The Requirements Of Federal Motor Vehicle Safety Standard No. 219, “windshield Zone Intrusion”.

1978 Ford F-series Visibility,windshield Recall | July 25, 1978

The Involved Vehicles Were Assembled Without The Intended Windshield Weatherstrip Lower Retainer. These Vehicles Fail To Comply With The Requirements Of Federal Motor Vehicle Safety Standard No. 219, “windshield Zone Intrusion”.. Follwoing Is The Summary Of Corrective Actions Taken: Dealer Will Install The Windshield Weatherstrip Lower Retainer At No Cost To Owner.
vehicle Description: Trucks Equipped With Bumper Push Bars And Pick-up Boxcovers.system: Visual; Windshield Weatherstrip Lower Retainer.consequences Of Defect: In The Event Of A Vehicle Impact, The Winshield Couldbe Displaced Into The Vehicle, And Glass Could Cause Serious Injuries Topassengers.

This recall was issued on July 25, 1978 for 1978 Ford F-series, manufactured by FORD MOTOR COMPANY, in response to Visibility,windshield problems.

1985 Ford F Series Recall | The Hydraulic Parking Brake Control Valve May Inadvertently Activate Due To Momentary Pressure Disruptions Within The System And Cause The Parking

1985 Ford F Series Parking Brake,driveline,air Recall | Dec 20, 1985

The Hydraulic Parking Brake Control Valve May Inadvertently Activate Due To Momentary Pressure Disruptions Within The System And Cause The Parking Brake To Be Applied, Stopping Or Slowing The Truck Unexpectedly. Consequence Of Defect: This Unexpected Stopping Or Slowing Of The Truck May Increase The Risk Of A Rear End Collision Since The Brake (stop) Lights Are Not Activated. Also, On Certain Road Conditions This Occurrence May Result In Loss Of Vehicle Control Which Would Lead To An Accident.. Follwoing Is The Summary Of Corrective Actions Taken: Replace The Push-pull Type Brake Control Valve With New Over-center Cam Type Valves.
system: Hydraulic Parking Brake Control Valve.vehicle Description: Medium And Heavy Truck And Bus Chassis Equipped With Hydraulic Brakes.

This recall was issued on Dec 20, 1985 for 1985 Ford F Series, manufactured by FORD MOTOR COMPANY, in response to Parking Brake,driveline,air problems.

1989 Ford F Series Recall | Bolts That Attach The Front Axle Track Bar Bracket To The Front Crossmember May Loosen, Allowing The Front Wheels To Oscillate With Front End Shimmy.

1989 Ford F Series Steering,linkages Recall | Jan 24, 1989

Bolts That Attach The Front Axle Track Bar Bracket To The Front Crossmember May Loosen, Allowing The Front Wheels To Oscillate With Front End Shimmy.severe Shimmy Could Damage Steering Linkage Or Steeringgear, Which Could Result In Loss Of Steering Control And An Accident.. Follwoing Is The Summary Of Corrective Actions Taken: Install Redesigned Front Axle Track Bar To Crossmember Bracket And If Necessary, Replace Certain Steering Components.
system: Suspension/steering.vehicle Description: F Super Duty Trucks And Chassis.

This recall was issued on Jan 24, 1989 for 1989 Ford F Series, manufactured by FORD MOTOR COMPANY, in response to Steering,linkages problems.

1990 Ford F Series Recall | Incorrect Size Master Cylinder Installed Will Provide Less Line Pressure To Wheel Cylinders For A Given Pedal Pressure.

1990 Ford F Series Service Brakes, Hydraulic,foundation Components,master Cylinder Recall | May 24, 1990

Incorrect Size Master Cylinder Installed Will Provide Less Line Pressure To Wheel Cylinders For A Given Pedal Pressure.this Could Result In Increased Stopping Distances Orincreased Pedal Pressure Required For A Given Stopping Distance, Which Couldcause An Accident.. Follwoing Is The Summary Of Corrective Actions Taken: Install The Correct 1.75 Inch Master Cylinder.
system: Hydromax Power Brake Assemblies.vehicle Description: Medium Duty Trucks.

This recall was issued on May 24, 1990 for 1990 Ford F Series, manufactured by FORD MOTOR COMPANY, in response to Service Brakes, Hydraulic,foundation Components,master Cylinder problems.

1990 Ford F Series Recall | Interconnection Of Return Line Plumbing From Hydroboost Steering Gear May Cause Light Application Of Hydroboost Unit Without Applying Brake Pedal.

1990 Ford F Series Service Brakes, Hydraulic,power Assist Recall | May 21, 1990

Interconnection Of Return Line Plumbing From Hydroboost Steering Gear May Cause Light Application Of Hydroboost Unit Without Applying Brake Pedal.this Could Result In Dragging Brakes, Brake Fade, Orpremature Wear And/or Heat Damage To Brake System Components, Reducing Brakingefficiency Which Could Result In An Accident.. Follwoing Is The Summary Of Corrective Actions Taken: Install Revised Return Lines And Replace Damaged Brake System Components.
system: Power Brake – Power Steering Gear Return Line.vehicle Description: F Super Duty Motor Home Chassis And F Super Duty Commercialchassis.

This recall was issued on May 21, 1990 for 1990 Ford F Series, manufactured by FORD MOTOR COMPANY, in response to Service Brakes, Hydraulic,power Assist problems.