1984 Ford Ltl9000 Steering,gear Box (other Than Rack And Pinion) Recall | Aug 29, 1984
Inadequate Lubrication Of The Steering Shaft Could Cause Steering Shaft Assemblies To Separate Without Warning.. Follwoing Is The Summary Of Corrective Actions Taken: Upon Inspection, The Intermediate Steering Gear Will Be Lubricated Or Replaced. In Addition, A Clamp Will Be Installed On The Lower Shaft To Restrict Its Movement.
vehicle Description: Heavy Trucks.system: Steering; Intermediate And Lower Steering Shaft Assemblies.consequences Of Defect: Steering Control Could Be Lost; Loss Of Vehicle Controlcould Result In An Accident.
This recall was issued on Aug 29, 1984 for 1984 Ford Ltl9000, manufactured by FORD MOTOR COMPANY, in response to Steering,gear Box (other Than Rack And Pinion) problems.
1986 Ford Ltl9000 Vehicle Speed Control Recall | Aug 12, 1986
Hand Throttle Controls Were Not Identified Either On The Control Knob Or On The Instrument Panel As Required By Fmvss 101. Consequence Of Defect: Trucks Are Not In Compliance With Fmvss 101, Controls And Displays.. Follwoing Is The Summary Of Corrective Actions Taken: Word Throttle Will Be Affixed On Or Adjacent To The Throttle Control.
system: Hand Throttle Control Identification/fmvss 101. Vehicle Description: Heavy Duty Truck Type Vehicles Equipped With Fleet Instructions Panels And Optional Vernier Hand Throttle Controls.
This recall was issued on Aug 12, 1986 for 1986 Ford Ltl9000, manufactured by FORD MOTOR COMPANY, in response to Vehicle Speed Control problems.
1990 Ford Ltl9000 Service Brakes, Air,controls Recall | June 25, 1990
Secondary Service Reservoir Air Check Valves May Not Seat Properly Due To A Mechanical Interference Condition Between A Circular Brass Guide And The Wall Of A Cylindrical Ferrule In Which The Brass Guide Is Intended To Move Freely.in The Event Of Pressure Loss In The Supply Reservoir,a Defective Check Valve Would Allow Pressure Equalization Between Primary Andsecondary Service Reservoirs, Presenting The Potential For Loss Or Absence Offront Braking Ability, Which Could Cause Loss Of Control And An Accident.. Follwoing Is The Summary Of Corrective Actions Taken: Install Revised Design Secondary Service Reservoir Check Valve Components.
system: Air Pressure Check Valves.vehicle Description: Heavy Duty Trucks And Chassis Cabs.
This recall was issued on June 25, 1990 for 1990 Ford Ltl9000, manufactured by FORD MOTOR COMPANY, in response to Service Brakes, Air,controls problems.
1995 Ford Ltl9000 Electrical System,wiring Recall | May 09, 1995
A Connector In The Wiring Where The Tilt Hood Mounted Lamps Attach To The Vehicle Wiring Harness Was Built Without Sealing Plugs. Moisture, Road Salt Or Other Contaminants Can Enter The Connection Resulting In Crossed Circuits, Shorts Or Corrosion Of The Wiring Of The Connector.the Headlamps Or Other Front-end Lighting Systems Can Malfunction As A Result Of This Condition Increasing The Potential For A Vehicle Accident.. Follwoing Is The Summary Of Corrective Actions Taken: Dealers Will Inspect The Connector And Install Sealing Plugs In The Open Cavities. If The Inspection Reveals Corrosion, A New Connector Will Be Installed.
system: Electrical; Wiring; Other Part.vehicle Description: Light And Medium Duty Trucks, Chassis-cabs And Cowl-chassis.note: If Your Vehicle Is Presented To An Authorized Dealer On An Agreed Up0n Service Date And The Remedy Is Not Provided Free Of Charge Within A Reasonable Time, Please Contact Ford At 1-800-392-3673. Also Contact The National Highway Traffic Safety Administration’s Auto Safety Hotline At 1-800-424-9393.
This recall was issued on May 09, 1995 for 1995 Ford Ltl9000, manufactured by FORD MOTOR COMPANY, in response to Electrical System,wiring problems.