1975 Ford Lts8000 Recall |

1975 Ford Lts8000 Power Train,axle Assembly,banjo Housing Recall | Aug 05, 1975

. Follwoing Is The Summary Of Corrective Actions Taken:
ford Campaign No 166.heavy Duty Trucks.built Jan.29, 1973 Thru June 3,1975.possibility That Tandem Rear Housing Wall Thickness At Journal Radiusadjacent To Spindle Friction Weld Joint May Not Be Sufficient To Insure Fatiguelife Equivalent To Expected Mileage Life Of Vehicle.housing Failure Canresult In Dual Wheel Assembly Becoming Disengaged From Vehicle, Resulting Inhazard To Other Traffic.this Campaign Supersedes Campaign 74-0241, Dateddecember 6, 1974.(correct By Inspecting And Replacing With Housing Ofincreased Wall Thickness Design).

This recall was issued on Aug 05, 1975 for 1975 Ford Lts8000, manufactured by FORD MOTOR COMPANY, in response to Power Train,axle Assembly,banjo Housing problems.

1974 Ford Lts8000 Recall |

1974 Ford Lts8000 Power Train,axle Assembly,banjo Housing Recall | Dec 09, 1974

. Follwoing Is The Summary Of Corrective Actions Taken:
ford Campaign No 148.heavy Duty Trucks.possibility That The Tandem Rearhousing Wall Thickness At The Journal Radius Adjacent To The Spindle Frictionweld Joint May Not Be Sufficient To Insure A Fatigue Life Equivalent To Theexpected Mileage Life Of The Vehicle.housing Failure Can Result In The Dualwheel Assembly Becoming Disengaged From Vehicle, Resulting In A Hazard To Othertraffic.(correct By Inspecting And Replacing With Housing Of An Increasedwall Thickness Design).note This Compaign Has Been Superceded By Campaign No.75-0149.dated 07/30/75.

This recall was issued on Dec 09, 1974 for 1974 Ford Lts8000, manufactured by FORD MOTOR COMPANY, in response to Power Train,axle Assembly,banjo Housing problems.

1971 Ford Lts8000 Recall |

1971 Ford Lts8000 Wheels,center Section Recall | Sept 17, 1971

. Follwoing Is The Summary Of Corrective Actions Taken:
campaign No H49.trucks.possibility That Wheel Hub Does Notmeet Requiredspecifications.under Certain Conditions, Suchas High Lateral Loading Of Thecomponents Encountered Duringcornering Cornering Maneuvers, Hub Could Crackat Brake Drum M Ounting Flange.(correct By Replacing Hub Where Necessary.)

This recall was issued on Sept 17, 1971 for 1971 Ford Lts8000, manufactured by FORD MOTOR COMPANY, in response to Wheels,center Section problems.

1995 Ford Lts8000 Recall | The Hand Throttle Cable Can Wear The Brass Swivel Block On The Governor Lever Through Which It Passes.

1995 Ford Lts8000 Vehicle Speed Control Recall | Aug 02, 1995

The Hand Throttle Cable Can Wear The Brass Swivel Block On The Governor Lever Through Which It Passes.this Wear Can Result In The Governor Jamming In Thedamaged Swivel And Could Prevent The Governor Lever From Returning To The Idle Position.. Follwoing Is The Summary Of Corrective Actions Taken: Dealers Will Install A Revised Governor Lever With A Stainless Steel Swivel. Also Letters Will Be Sent To Vehicle Owners That Have The Same Vehicles But Do Not Have A Ford Installed Hand Throttle Advising Them That They May Require Service If They Have Had An After Market Hand Throttle Installed.
system: Fuel; Throttle Linkages And Control.vehicle Description: Trucks, Chassis-cabs And Cowl-chassis Vehicles With Inline Fuel Injection Pump Equipped Fd-1060 Or Fd-1460 Engines And Hand Throttles.note: The Vehicle Brakes Are Capable Of Overriding The Engine Power And Bringing The Vehicle To A Stop.note: Owners Who Take Their Vehicles To An Authorized Dealer On An Agreed Upon Service Date And Do Not Receive The Free Remedy Within A Reasonablet Ime, Should Contact Ford At 1-800-392-3673. Also Contact The National Highway Traffic Safety Administration’s Auto Safety Hotline At 1-800-424-9393.

This recall was issued on Aug 02, 1995 for 1995 Ford Lts8000, manufactured by FORD MOTOR COMPANY, in response to Vehicle Speed Control problems.

1990 Ford Lts8000 Recall | Secondary Service Reservoir Air Check Valves May Not Seat Properly Due To A Mechanical Interference Condition Between A Circular Brass Guide And The Wall Of A Cylindrical Ferrule In Which The Brass Guide Is Intended

1990 Ford Lts8000 Service Brakes, Air,controls Recall | June 25, 1990

Secondary Service Reservoir Air Check Valves May Not Seat Properly Due To A Mechanical Interference Condition Between A Circular Brass Guide And The Wall Of A Cylindrical Ferrule In Which The Brass Guide Is Intended To Move Freely.in The Event Of Pressure Loss In The Supply Reservoir,a Defective Check Valve Would Allow Pressure Equalization Between Primary Andsecondary Service Reservoirs, Presenting The Potential For Loss Or Absence Offront Braking Ability, Which Could Cause Loss Of Control And An Accident.. Follwoing Is The Summary Of Corrective Actions Taken: Install Revised Design Secondary Service Reservoir Check Valve Components.
system: Air Pressure Check Valves.vehicle Description: Heavy Duty Trucks And Chassis Cabs.

This recall was issued on June 25, 1990 for 1990 Ford Lts8000, manufactured by FORD MOTOR COMPANY, in response to Service Brakes, Air,controls problems.

1993 Ford Lts8000 Recall | As A Result Of Inherent Vibration In These Engines, The Throttle Return Springs Can Fracture.

1993 Ford Lts8000 Vehicle Speed Control,springs Recall | Sept 27, 1993

As A Result Of Inherent Vibration In These Engines, The Throttle Return Springs Can Fracture.if One Of The Two Return Springs Fractures While Thevehicle Is Being Driven, A Substantial Reduction In Accelerator Pedal Effortwould Be Felt. If The Second Spring Also Fractures, The Throttle Would Notreturn To Idle Position And Can Result In Increased Engine Speed And Thepossibility Of Loss Of Vehicle Control And An Accident.. Follwoing Is The Summary Of Corrective Actions Taken: The Throttle Return Control System With The Coil Torsion Spring Design Will Be Replaced.
system: Fuel: Throttle Linkages And Control Return Spring.vehicle Description: Medium And Heavy Trucks, Truck Chassis, And Bus Chassisequipped With Cummins 5.9l And 8.3l Diesel Engines With In-line Fuel Injectionpumps.note: If Your Vehicle Is Presented To An Authorized Dealer On An Agreed Uponservice Date And The Remedy Is Not Provided Within A Reasonable Time And Freeof Charge Or The Remedy Is Does Not Correct The Defect Or Noncompliance, Pleasecontact The Ford Service Center At 1-800-392-3673. Also, Contact The Nationalhighway Traffic Safety Administration’s Auto Safety Hotline At 1-800-424-9393.

This recall was issued on Sept 27, 1993 for 1993 Ford Lts8000, manufactured by FORD MOTOR COMPANY, in response to Vehicle Speed Control,springs problems.