2008 Ford Ranchero Recall | Intercontinental Auto Parts Is Recalling 1,937 Fuel Filters, P/nos Alg

2008 Ford Ranchero Fuel System, Gasoline,delivery,fuel Pump Recall | Mar 06, 2008

Intercontinental Auto Parts Is Recalling 1,937 Fuel Filters, P/nos Alg 44/1 And Purolator F10024, Shipped Between January 14 And February 13, 2008, Sold For Use On The Vehicles Listed Above. The Filter’s Outlet Cap May Not Be Securely Crimped To The Housing. This Could Result In A Separation Of Filter’s Outlet Cap From The Housing.

If This Condition Occurs While Attempting To Start The Vehicle, A No Start Condition May Result And Fuel May Be Pumped Onto The Ground. If This Occurs While The Vehicle Is In Motion, The Engine May Stop Due To Inadequate Fuel Supply. If An Ignition Source Were Present, Fuel Leakage May Result In A Fire.

Summary Of Corrective Actions Taken: Intercontinental Will Replace The Fuel Filters Free Of Charge. The Recall Began During March 2008. Owners May Contact Intercontinental At 800-451-2593.

This Recall Only Pertains To Intercontinental Aftermarket Fuel Filters And Has No Relation To Any Original Equipment Installed On Vehicles Manufactured By The Ford Motor Company.customers May Contact The National Highway Traffic Safety Administration’s Vehicle Safety Hotline At 1-888-327-4236 (tty: 1-800-424-9153); Or Go To Http://www.safercar.gov.

This recall was issued on Mar 06, 2008 for 2008 Ford Ranchero, manufactured by INTERCONTINENTAL AUTO PARTS, in response to Fuel System, Gasoline,delivery,fuel Pump problems.

2007 Ford Ranchero Recall | Certain Federal-mogul Aftermarket Fuel Pumps Sold Under The Brand Names Of Carter,

2007 Ford Ranchero Fuel System, Gasoline,delivery,fuel Pump Recall | Aug 27, 2007

Certain Federal-mogul Aftermarket Fuel Pumps Sold Under The Brand Names Of Carter, Accuflow, Napa, Truflow, Parts Depo, And Parts Master, Shipped Between August 2006 And July 2007 For Use On The Vehicles Listed Above. The Fuel Pump Diaphragm In Certain Production Runs May Have Been Improperly Installed Or Inadequately Tested Which May Cause The Fuel Pump To Leak.

A Leaking Fuel Pump Could Create A Vehicle Fire Hazard.

Summary Of Corrective Actions Taken: Federal-mogul Will Notify Owners And Replace The Defective Fuel Pumps Free Of Charge. The Recall Began On October 15, 2007. Owners Can Contact Federal-mogul At 248-354-7700.

This Recall Only Pertains To Aftermarket Carter, Napa, Accuflow, Tru Flow, Parts Master, And Parts Depot Brand Fuel Pumps And Has No Relation To Any Original Equipment Installed On The Listed Motor Vehicles.customers May Contact The National Highway Traffic Safety Administration’s Vehicle Safety Hotline At 1-888-327-4236 (tty: 1-800-424-9153); Or Go To Http://www.safercar.gov.

This recall was issued on Aug 27, 2007 for 2007 Ford Ranchero, manufactured by FEDERAL-MOGUL CORPORATION, in response to Fuel System, Gasoline,delivery,fuel Pump problems.

1979 Ford Ranchero Recall | The Involved Vehicles May Have Been Built With Incorrect Weld Nuts That Attach The Rear Portion Of The Front Outboard Seat Track To The Floor Pan. The Incorrect Nuts Have An Oversize Diameter And

1979 Ford Ranchero Seats,mid/rear Assembly Recall | Jan 09, 1979

The Involved Vehicles May Have Been Built With Incorrect Weld Nuts That Attach The Rear Portion Of The Front Outboard Seat Track To The Floor Pan. The Incorrect Nuts Have An Oversize Diameter And Thread, And Upon Front Seat Track Anchor Bolt Installation, The Threads May Have Been Stripped.. Follwoing Is The Summary Of Corrective Actions Taken: The Dealer Will Inspect And, If Necessary, Repair Any Stripped Weld Nuts And Install Larger Size Bolts To Anchor The Seat Track To The Floor At No Cost To Owner.
vehicle Description: Passenger Vehicles.system: Interior; Floor Pan Attachments.consequences Of Defect: In The Event Of A Collision, The Front Seat Candisengage From Floor Mounting Creating The Potential For Serious Personalinjury To Occupant.

This recall was issued on Jan 09, 1979 for 1979 Ford Ranchero, manufactured by FORD MOTOR COMPANY, in response to Seats,mid/rear Assembly problems.

1968 Ford Ranchero Recall |

1968 Ford Ranchero Steering,linkages,arm,idler And Attachment Recall | Mar 07, 1968

. Follwoing Is The Summary Of Corrective Actions Taken:
possibility That Improper Heat-treated Center Link Pin To Steering Idler Arm May Fail Due To Tension Stress After Tightening The Retaining Nut.failure Of This Pin Could Cause Loss Of Steering Control.(correct By Replacing With Proper Heat-treated Pin.)

This recall was issued on Mar 07, 1968 for 1968 Ford Ranchero, manufactured by FORD MOTOR COMPANY, in response to Steering,linkages,arm,idler And Attachment problems.

1972 Ford Ranchero Recall |

1972 Ford Ranchero Fuel System, Gasoline,carburetor System Recall | Nov 08, 1972

. Follwoing Is The Summary Of Corrective Actions Taken:
ford Campaign No H-5c.equipped W/429-4v Engines.possibility That Carburetormay Leak Fuel From Around Power Valve Restrictor Plug.if Condition Exists,could Drain Fuel Bowl During Engine Shutdown And Result In Delayed Starting.there Is Also Possibility Of Fumes From Leaking Fuel Which Could Be Ignitedshould Spark Occur.(correct By Inspecting And Replacing Where Necessary.)

This recall was issued on Nov 08, 1972 for 1972 Ford Ranchero, manufactured by FORD MOTOR COMPANY, in response to Fuel System, Gasoline,carburetor System problems.

1972 Ford Ranchero Recall | The Shoulder Belt Pin Connector Plastic Sleeves Which Were Injection Molded Can Have Surface Imperfections Or Discontinuities At The Point At Which Thermal Plastic Is Injected Into Mold And Where Flow Diverges To Fill Both

1972 Ford Ranchero Seat Belts,front,webbing Recall | June 29, 1972

The Shoulder Belt Pin Connector Plastic Sleeves Which Were Injection Molded Can Have Surface Imperfections Or Discontinuities At The Point At Which Thermal Plastic Is Injected Into Mold And Where Flow Diverges To Fill Both Sides Of The Ring. If The Condition Exists And The Sleeve Breaks Away From The Pin, The Shoulder Belt Will Not Remain Engaged To The Seat Belt Buckle.if The Shoulder Belt Is Separated From The Seat Beltbuckle, The Shoulder Belt Will Not Properly Protect Seat Occupants In The Eventof A Suddent Stop Or Accident.. Follwoing Is The Summary Of Corrective Actions Taken: Replace The Shoulder Belt Pin Connector Plastic Sleeve With Neoprene Retainers.
system: Interior; Safety Belts.vehicle Description: Passenger Cars And Light Trucks.

This recall was issued on June 29, 1972 for 1972 Ford Ranchero, manufactured by FORD MOTOR COMPANY, in response to Seat Belts,front,webbing problems.

1976 Ford Ranchero Recall |

1976 Ford Ranchero Vehicle Speed Control,cables Recall | Apr 29, 1976

. Follwoing Is The Summary Of Corrective Actions Taken:
ford Campaign No 192. Possibility That The Nylon Bushing In The Acceleratorncable May Become Loose Due To An Oversize Retaining Clip. A Loose Bushing Maylrestrict The Accelerator Cable From Returning To Idle Or To A Lower Speedor To A Slower Speed Condition, Holding Carburetor At Constant Speed. Shouldthis Occur, The Driver Can Stop The Vehicle By Applying The Brakes, Shiftingto Neutral And Turning Off The Ignition. (correct By Inspecting The Bushingbushing Retaining Clip Where Necessary.)

This recall was issued on Apr 29, 1976 for 1976 Ford Ranchero, manufactured by FORD MOTOR COMPANY, in response to Vehicle Speed Control,cables problems.

1973 Ford Ranchero Recall |

1973 Ford Ranchero Steering,linkages,arm,idler And Attachment Recall | Mar 12, 1973

. Follwoing Is The Summary Of Corrective Actions Taken:
ford Campaign No H-8d.possibility That In The Process Of Connecting Thecenter Link To Idler Arm A Cotter Pin Was Omitted, Which Holds The Attachingnut In Position Should Nut Be Installed Loose.if This Pin Is Missing It Couldallow Nut To Drop Off And Linkage To Disengage From Idler Arm, And Affectsteering Control.(correct By Inspecting And Install Cotter Pin Wherenecessary.)

This recall was issued on Mar 12, 1973 for 1973 Ford Ranchero, manufactured by FORD MOTOR COMPANY, in response to Steering,linkages,arm,idler And Attachment problems.

1977 Ford Ranchero Recall | Seven-blade Cooling Fans Installed On The Involved Vehicles May Be Subject To Fatigue Cracking Of The Blades Due To Stresses Generated During Normal Vehicle Operation.

1977 Ford Ranchero Engine And Engine Cooling,cooling System,fan Recall | June 20, 1977

Seven-blade Cooling Fans Installed On The Involved Vehicles May Be Subject To Fatigue Cracking Of The Blades Due To Stresses Generated During Normal Vehicle Operation.. Follwoing Is The Summary Of Corrective Actions Taken: Dealer Will Replace Seven Blade Fan With A Fan Of Five Blade Design, Without Charge To Owner.
vehicle Description: Passenger Vehicles Equipped With 302, 351, Or 400 Cidengines And Air Conditioning.system: Engine And Engine Cooling; Fan.consequences Of Defect: Blades May Become Fragmented And Pieces Could Bepropelled In All Directions, Damaging Other Engine Components. Nearby Personscould Be Seriously Injured If The Hood Is Open At The Time Of Failure.note: Vehicle Should Not Be Serviced With The Hood Open And The Engine Runninguntil The Problem Has Been Corrected.

This recall was issued on June 20, 1977 for 1977 Ford Ranchero, manufactured by FORD MOTOR COMPANY, in response to Engine And Engine Cooling,cooling System,fan problems.

1975 Ford Ranchero Recall |

1975 Ford Ranchero Fuel System, Gasoline,carburetor System Recall | Mar 04, 1975

. Follwoing Is The Summary Of Corrective Actions Taken:
ford Campaign No 154.light Trucks Eqtipped With 460 Cid Engine & 4353-4vcarburetor.possibility That The “o” Ring On The Sealing Plug Installed In Thefuel Inlet Cross-channel Of The Carburetor May Experience Loss Of The Sealingplug.should Plug Loss Occur, Fuel Pump Operation Would Cause Gasoline To Bedischarged Onto The Engine Under Pressure.a Strong Fuel Odor Would Resultwith Potential For The Occurence Of An Underhood Fire.(correct By Installingnew Plug Less “o” Ring Using An Epoxy Coating Over Plug And Adjacent Surface).

This recall was issued on Mar 04, 1975 for 1975 Ford Ranchero, manufactured by FORD MOTOR COMPANY, in response to Fuel System, Gasoline,carburetor System problems.