2000 Ford F-150 Recall | Vehicle Description: Regular Cab Pickup Trucks. The Driver Side

2000 Ford F-150 Seat Belts,front,retractor Recall | Oct 30, 2000

Vehicle Description: Regular Cab Pickup Trucks. The Driver Side Seat Belt Retractor May Not Fully Retract The Belt.

This Could Cause Slack In The Seat Belt When Worn, Increasing The Risk Of Personal Injury To The Seat Occupant, In The Event Of A Crash.

Summary Of Corrective Actions Taken: Dealers Will Replace The Driver’s Side Seat Belt Assembly.

Owner Notification Began November 9, 2000.owners Who Take Their Vehicles To An Authorized Dealer On An Agreed Upon Service Date And Do Not Receive The Free Remedy Within A Reasonable Time Should Contact Ford At 1-800-392-3673.also Contact The National Highway Traffic Safety Administration’s Auto Safety Hotline At 1-888-dash-2-dot (1-888-327-4236).

This recall was issued on Oct 30, 2000 for 2000 Ford F-150, manufactured by FORD MOTOR COMPANY, in response to Seat Belts,front,retractor problems.

1969 Ford Fairlane Recall |

1969 Ford Fairlane Seat Belts,front,retractor Recall | Sept 04, 1969

. Follwoing Is The Summary Of Corrective Actions Taken:
possibility That Seat Belt Retractor Locking Mechanism May Be Im- Paired Bycertain Design And Production Problems.(correct By Installing Revisedretractor.)

This recall was issued on Sept 04, 1969 for 1969 Ford Fairlane, manufactured by FORD MOTOR COMPANY, in response to Seat Belts,front,retractor problems.

1969 Ford Mustang Recall |

1969 Ford Mustang Service Brakes, Hydraulic,foundation Components,disc,rotor Recall | July 16, 1969

. Follwoing Is The Summary Of Corrective Actions Taken:
possibility That Front Brake Rotor Assembly, Designed For Use In Boss 302mustang, Has Been Assembled Incorporating A Larger Diameter Wheel Bearingwhich, If Combined With A Smaller Diameter Spindle, Will Allow Relativemovement And Eventual Failure Of Bearing And/or Spindle.(correct Byinspecting And Replacing Parts When Neces- Sary.)

This recall was issued on July 16, 1969 for 1969 Ford Mustang, manufactured by FORD MOTOR COMPANY, in response to Service Brakes, Hydraulic,foundation Components,disc,rotor problems.

1970 Ford Fairlane Recall |

1970 Ford Fairlane Seat Belts,front,retractor Recall | May 12, 1970

. Follwoing Is The Summary Of Corrective Actions Taken:
possibility That Seat Belt Retractor Locking Mechansim May Be Erratic Inlocking Action.(correct By Replacing Where Necessary With Proper Seat Beltretractor Mechan- Ism.)

This recall was issued on May 12, 1970 for 1970 Ford Fairlane, manufactured by FORD MOTOR COMPANY, in response to Seat Belts,front,retractor problems.

1970 Ford Mustang Recall |

1970 Ford Mustang Structure,frame And Members Recall | Sept 25, 1970

. Follwoing Is The Summary Of Corrective Actions Taken:
possibility That In Welding #2 Cross- Member To Side Rails Some Spot Welds Wereinadvertently Missed During Production.this Could Cause Separation Of #2cross- Member From Its Support And Cause Loss Of Front End Alignment, Increasedtire Wear And Steering Effort.(correct By Welding Where Necessary.)

This recall was issued on Sept 25, 1970 for 1970 Ford Mustang, manufactured by FORD MOTOR COMPANY, in response to Structure,frame And Members problems.

1970 Ford Thunderbird Recall |

1970 Ford Thunderbird Seat Belts,front,anchorage Recall | Sept 25, 1970

. Follwoing Is The Summary Of Corrective Actions Taken:
possibility That Front And Rear In- Board Seat Belt Anchors Were In- Adequatelywelded To Floor Pan.(correct By Inspecting And Prop- Erly Welding Wherenecessary.)

This recall was issued on Sept 25, 1970 for 1970 Ford Thunderbird, manufactured by FORD MOTOR COMPANY, in response to Seat Belts,front,anchorage problems.

1970 Ford Ford Recall |

1970 Ford Ford Suspension,front,control Arm,lower Arm Recall | Sept 03, 1970

. Follwoing Is The Summary Of Corrective Actions Taken:
possibility That Cracks Can Be Induced In Front Lower Control Arms If Frontsuspension Is Repeatedly Subjected To Very Severe Loading Sometimesentercountered In Police Service.such Cracking Could Ultimately Result Infracture Through Arm In Ball Joint Area, And Cause Discon- Nection Betweenlower Control Arm And Front Wheel Which Would Seriously Hamper Driver’s Abilityto Fully Control Vehicle.(correct By Replacing With A Heavy Duty Improvedarm.)

This recall was issued on Sept 03, 1970 for 1970 Ford Ford, manufactured by FORD MOTOR COMPANY, in response to Suspension,front,control Arm,lower Arm problems.

1978 Ford F250 Recall | The Driver”s Side Shoulder Belt Retractor Mounting Bracket Assembly Contains A Weld Nut Which Was Improperly Attached To The Bracket. This Fails To Comply With The Requirements Of Federal Motor Vehicle Safety Standard No.

1978 Ford F250 Seat Belts,front,retractor Recall | Aug 07, 1978

The Driver”s Side Shoulder Belt Retractor Mounting Bracket Assembly Contains A Weld Nut Which Was Improperly Attached To The Bracket. This Fails To Comply With The Requirements Of Federal Motor Vehicle Safety Standard No. 210, “seat Belt Assembly Anchorages”.. Follwoing Is The Summary Of Corrective Actions Taken: The Dealer Will Repair The Left Side Shoulder Belt Retractor Mounting Bracket On The Involved Vehicles Free Of Charge.
vehicle Description: Light Trucks.system: Interior; Restraint Anchorage.consequences Of Defect: In The Event Of A Vehicle Collision, The Shoulder Beltmay Not Adequately Restrain The Driver And The Chances Of Injury Would Beincreased.

This recall was issued on Aug 07, 1978 for 1978 Ford F250, manufactured by FORD MOTOR COMPANY, in response to Seat Belts,front,retractor problems.

1978 Ford F150 Recall | The Driver”s Side Shoulder Belt Retractor Mounting Bracket Assembly Contains A Weld Nut Which Was Improperly Attached To The Bracket. This Fails To Comply With The Requirements Of Federal Motor Vehicle Safety Standard No.

1978 Ford F150 Seat Belts,front,retractor Recall | Aug 07, 1978

The Driver”s Side Shoulder Belt Retractor Mounting Bracket Assembly Contains A Weld Nut Which Was Improperly Attached To The Bracket. This Fails To Comply With The Requirements Of Federal Motor Vehicle Safety Standard No. 210, “seat Belt Assembly Anchorages”.. Follwoing Is The Summary Of Corrective Actions Taken: The Dealer Will Repair The Left Side Shoulder Belt Retractor Mounting Bracket On The Involved Vehicles Free Of Charge.
vehicle Description: Light Trucks.system: Interior; Restraint Anchorage.consequences Of Defect: In The Event Of A Vehicle Collision, The Shoulder Beltmay Not Adequately Restrain The Driver And The Chances Of Injury Would Beincreased.

This recall was issued on Aug 07, 1978 for 1978 Ford F150, manufactured by FORD MOTOR COMPANY, in response to Seat Belts,front,retractor problems.

1978 Ford F100 Recall | The Driver”s Side Shoulder Belt Retractor Mounting Bracket Assembly Contains A Weld Nut Which Was Improperly Attached To The Bracket. This Fails To Comply With The Requirements Of Federal Motor Vehicle Safety Standard No.

1978 Ford F100 Seat Belts,front,retractor Recall | Aug 07, 1978

The Driver”s Side Shoulder Belt Retractor Mounting Bracket Assembly Contains A Weld Nut Which Was Improperly Attached To The Bracket. This Fails To Comply With The Requirements Of Federal Motor Vehicle Safety Standard No. 210, “seat Belt Assembly Anchorages”.. Follwoing Is The Summary Of Corrective Actions Taken: The Dealer Will Repair The Left Side Shoulder Belt Retractor Mounting Bracket On The Involved Vehicles Free Of Charge.
vehicle Description: Light Trucks.system: Interior; Restraint Anchorage.consequences Of Defect: In The Event Of A Vehicle Collision, The Shoulder Beltmay Not Adequately Restrain The Driver And The Chances Of Injury Would Beincreased.

This recall was issued on Aug 07, 1978 for 1978 Ford F100, manufactured by FORD MOTOR COMPANY, in response to Seat Belts,front,retractor problems.