2012 Ford Expedition Recall | Ford Is Recalling Certain Model Year 2012 Expedition And Lincoln Navigator Vehicles,

2012 Ford Expedition Seats,mid/rear Assembly Recall | Feb 02, 2012

Ford Is Recalling Certain Model Year 2012 Expedition And Lincoln Navigator Vehicles, Manufactured From November 19, 2011, Through December 2, 2011, For Failing To Comply With The Requirements Of Federal Motor Vehicle Safety Standard No. 202, “head Restraints.” These Vehicles May Have Inadequate Welds On The Head Restraint Support Brackets For The Second Row, Right-hand Seat.

In The Event Of A Crash, The Seat Head Restraint May Not Provide The Required Strength, Increasing The Risk Of Injury.

Summary Of Corrective Actions Taken: Ford Will Notify Owners, And Dealers Will Replace The Head Restraints As Necessary, Free Of Charge. The Safety Recall Began On February 21, 2012. Owners May Contact Ford Motor Company Customer Relationship Center At 1-866-436-7332.

Ford’s Recall Campaign Number Is 12c22.customers May Contact The National Highway Traffic Safety Administration’s Vehicle Safety Hotline At 1-888-327-4236 (tty: 1-800-424-9153); Or Go To Http://www.safercar.gov.

This recall was issued on Feb 02, 2012 for 2012 Ford Expedition, manufactured by FORD MOTOR COMPANY, in response to Seats,mid/rear Assembly problems.

2003 Ford Windstar Recall | Certain Minivans Fail To Comply With The Requirements Of Federal Motor Vehicle

2003 Ford Windstar Seats,mid/rear Assembly Recall | Nov 06, 2003

Certain Minivans Fail To Comply With The Requirements Of Federal Motor Vehicle Safety Standard No. 225, “child Restraint Anchorage System.” During Testing, A Third Row Bench Floor-to-seat Latch Released Before The Strength Requirement Was Met. Identical Latches Are Used In The Second Row Of Seats.

If The Latches On Th4e Second Or Third Row Seats Of The Vehicle Release In A Crash, The Potential For Occupant Injury Is Increased.

Summary Of Corrective Actions Taken: Dealers Will Replace The Seat-to-floor Latches On The Second And Third Row Of Seats. Owner Notification Began On November 21, 2003. Owners Should Contact Ford At 1-800-392-3673.

Ford Recall No. 03c05.also, Customers Can Contact The National Highway Traffic Safety Administration’s Auto Safety Hotline At 1-888-dash-2-dot (1-888-327-4236).

This recall was issued on Nov 06, 2003 for 2003 Ford Windstar, manufactured by FORD MOTOR COMPANY, in response to Seats,mid/rear Assembly problems.

1979 Ford Ranchero Recall | The Involved Vehicles May Have Been Built With Incorrect Weld Nuts That Attach The Rear Portion Of The Front Outboard Seat Track To The Floor Pan. The Incorrect Nuts Have An Oversize Diameter And

1979 Ford Ranchero Seats,mid/rear Assembly Recall | Jan 09, 1979

The Involved Vehicles May Have Been Built With Incorrect Weld Nuts That Attach The Rear Portion Of The Front Outboard Seat Track To The Floor Pan. The Incorrect Nuts Have An Oversize Diameter And Thread, And Upon Front Seat Track Anchor Bolt Installation, The Threads May Have Been Stripped.. Follwoing Is The Summary Of Corrective Actions Taken: The Dealer Will Inspect And, If Necessary, Repair Any Stripped Weld Nuts And Install Larger Size Bolts To Anchor The Seat Track To The Floor At No Cost To Owner.
vehicle Description: Passenger Vehicles.system: Interior; Floor Pan Attachments.consequences Of Defect: In The Event Of A Collision, The Front Seat Candisengage From Floor Mounting Creating The Potential For Serious Personalinjury To Occupant.

This recall was issued on Jan 09, 1979 for 1979 Ford Ranchero, manufactured by FORD MOTOR COMPANY, in response to Seats,mid/rear Assembly problems.

1979 Ford Ltd Ii Recall | The Involved Vehicles May Have Been Built With Incorrect Weld Nuts That Attach The Rear Portion Of The Front Outboard Seat Track To The Floor Pan. The Incorrect Nuts Have An Oversize Diameter And

1979 Ford Ltd Ii Seats,mid/rear Assembly Recall | Jan 09, 1979

The Involved Vehicles May Have Been Built With Incorrect Weld Nuts That Attach The Rear Portion Of The Front Outboard Seat Track To The Floor Pan. The Incorrect Nuts Have An Oversize Diameter And Thread, And Upon Front Seat Track Anchor Bolt Installation, The Threads May Have Been Stripped.. Follwoing Is The Summary Of Corrective Actions Taken: The Dealer Will Inspect And, If Necessary, Repair Any Stripped Weld Nuts And Install Larger Size Bolts To Anchor The Seat Track To The Floor At No Cost To Owner.
vehicle Description: Passenger Vehicles.system: Interior; Floor Pan Attachments.consequences Of Defect: In The Event Of A Collision, The Front Seat Candisengage From Floor Mounting Creating The Potential For Serious Personalinjury To Occupant.

This recall was issued on Jan 09, 1979 for 1979 Ford Ltd Ii, manufactured by FORD MOTOR COMPANY, in response to Seats,mid/rear Assembly problems.

1979 Ford Thunderbird Recall | The Involved Vehicles May Have Been Built With Incorrect Weld Nuts That Attach The Rear Portion Of The Front Outboard Seat Track To The Floor Pan. The Incorrect Nuts Have An Oversize Diameter And

1979 Ford Thunderbird Seats,mid/rear Assembly Recall | Jan 09, 1979

The Involved Vehicles May Have Been Built With Incorrect Weld Nuts That Attach The Rear Portion Of The Front Outboard Seat Track To The Floor Pan. The Incorrect Nuts Have An Oversize Diameter And Thread, And Upon Front Seat Track Anchor Bolt Installation, The Threads May Have Been Stripped.. Follwoing Is The Summary Of Corrective Actions Taken: The Dealer Will Inspect And, If Necessary, Repair Any Stripped Weld Nuts And Install Larger Size Bolts To Anchor The Seat Track To The Floor At No Cost To Owner.
vehicle Description: Passenger Vehicles.system: Interior; Floor Pan Attachments.consequences Of Defect: In The Event Of A Collision, The Front Seat Candisengage From Floor Mounting Creating The Potential For Serious Personalinjury To Occupant.

This recall was issued on Jan 09, 1979 for 1979 Ford Thunderbird, manufactured by FORD MOTOR COMPANY, in response to Seats,mid/rear Assembly problems.

1977 Ford Bronco Recall | On The Involved Vehicles, Build-up Of Carpet/mat Deadener And Insulation Under The Rear Seat Frame And Seat Belt Anchor Tabs May Prevent The Optional Folding Rear Seat Cushion From Latching Properly. The Latch

1977 Ford Bronco Seats,mid/rear Assembly Recall | Aug 29, 1977

On The Involved Vehicles, Build-up Of Carpet/mat Deadener And Insulation Under The Rear Seat Frame And Seat Belt Anchor Tabs May Prevent The Optional Folding Rear Seat Cushion From Latching Properly. The Latch May Be Only Partially Engaged And Fail To Sustain The Seat Belt Anchorage Loading Requirements Of Federal Motor Vehicle Safety Standard No. 210, “seat Belt Assembly And Anchorages”.. Follwoing Is The Summary Of Corrective Actions Taken: Dealer Will Install Spacer Washers At The Latch Striker Attachment To Correct The Problem, Without Charge To Owner.
vehicle Description: Trucks Equipped With Folding Rear Seats.system: Interior; Rear Seat.consequences Of Defect: If The Seats Are Not Latched Properly, In The Event Ofa Sudden Stop Or A Vehicle Impact, Passenger Injuries Could Result.

This recall was issued on Aug 29, 1977 for 1977 Ford Bronco, manufactured by FORD MOTOR COMPANY, in response to Seats,mid/rear Assembly problems.