2001 Ford Contour Recall | Vehicle Description: Passenger Vehicles Built With An Incorrect Power Brake Booster

2001 Ford Contour Service Brakes, Hydraulic,power Assist,vacuum Recall | Feb 14, 2001

Vehicle Description: Passenger Vehicles Built With An Incorrect Power Brake Booster And Master Cylinder Assembly.

If Either The Master Cylinder Or Power Brake Booster Is Subsequently Serviced With Only One Of The Correct Brake Booster Or Master Cylinder Parts, Brake Performance Would Be Reduced.

Summary Of Corrective Actions Taken: Dealers Will Install The Correct Contour Brake Booster And Master Cylinder In Each Of These Vehicles. Owner Notification Began January 28, 2002. Owners Who Take Their Vehicles To An Authorized Dealer On An Agreed Upon Service Date And Do Not Receive The Free Remedy Within A Reasonable Time Should Contact Ford At 1-866-436-7332.

Customers Can Also Contact The National Highway Traffic Safety Administration’s Auto Safety Hotline At 1-888-dash-2-dot (1-888-327-4236).

This recall was issued on Feb 14, 2001 for 2001 Ford Contour, manufactured by FORD MOTOR COMPANY, in response to Service Brakes, Hydraulic,power Assist,vacuum problems.

2007 Ford Escape Recall | Certain Cardone Master Cylinders With Part Numbers 10-2925, 10-2987, 10-2987mza,

2007 Ford Escape Service Brakes, Hydraulic,foundation Components,master Cylinder Recall | Mar 29, 2007

Certain Cardone Master Cylinders With Part Numbers 10-2925, 10-2987, 10-2987mza, 10-3083, 11-3015, 11-3042, 11-3044, 11-3045, 11-3047, 11-3064, And 11-3156, And With Date Codes Lower Than Dca7078 Sold As Replacement Equipment For Use On The Vehicles Listed Above. The Seal On Master Cylinder Can Fail And Leak Brake Fluid.

Loss Of Brake Fluid Can Result In Poor Braking Performance, Possibly Resulting In A Vehicle Crash.

Summary Of Corrective Actions Taken: Cardone Will Notify Owners And Offer To Repurchase Any Defective Master Cylinders. The Recall Began During April 2007. Owners Can Contact Cardone At 1-800-777-4780.

This Recall Only Pertains To Aftermarket Cardone Master Cylinders And Has No Relation To Any Original Equipment Installed On The Vehicles Listed Above.customers May Contact The National Highway Traffic Safety Administration’s Vehicle Safety Hotline At 1-888-327-4236 (tty: 1-800-424-9153); Or Go To Http://www.safercar.gov.

This recall was issued on Mar 29, 2007 for 2007 Ford Escape, manufactured by CARDONE INDUSTRIES, INC., in response to Service Brakes, Hydraulic,foundation Components,master Cylinder problems.

1999 Ford Windstar Recall | Vehicle Description: Minivans. The Brake Fluid Master Cylinder Is Recessed And Oriented In The Engine Compartment So That The Brake Fluid Warning Statement Embossed On Both The Top Of The Filler Cap

1999 Ford Windstar Service Brakes, Hydraulic,foundation Components,master Cylinder Recall | June 14, 1999

Vehicle Description: Minivans. The Brake Fluid Master Cylinder Is Recessed And Oriented In The Engine Compartment So That The Brake Fluid Warning Statement Embossed On Both The Top Of The Filler Cap And The Side Of The Reservoir Body Are Not Entirely Visible By Direct View. These Vehicles May Not Fully Comply With Requirements Of Fmvss No. 135, “passenger Car Brake Systems.”. Follwoing Is The Summary Of Corrective Actions Taken: Owners Will Be Provided With New Labels And Installation Instructions.
owner Notification Began June 16, 1999.owners Who Take Their Vehicles To An Authorized Dealer On An Agreed Upon Service Date And Do Not Receive The Free Remedy Within A Reasonable Time Should Contact Ford At 1-800-392-3673.also Contact The National Highway Traffic Safety Administration’s Auto Safety Hotline At 1-888-dash-2-dot (1-888-327-4236).

This recall was issued on June 14, 1999 for 1999 Ford Windstar, manufactured by FORD MOTOR COMPANY, in response to Service Brakes, Hydraulic,foundation Components,master Cylinder problems.

1966 Ford F100 Recall |

1966 Ford F100 Service Brakes, Hydraulic,foundation Components,master Cylinder Recall | Oct 20, 1966

. Follwoing Is The Summary Of Corrective Actions Taken:
possibility That The Brake Master Cylinder Contains A Brittle Pushrod Retaining Ring.if This Ring Breaks, It Could Permit The Pushrod To Become Disengaged From The Master Cylinder, Rendering The Hydraulic Brake System Inoperative.(add Bumper Stop To Prevent Disengagement.)

This recall was issued on Oct 20, 1966 for 1966 Ford F100, manufactured by FORD MOTOR COMPANY, in response to Service Brakes, Hydraulic,foundation Components,master Cylinder problems.

1966 Ford P100 Recall |

1966 Ford P100 Service Brakes, Hydraulic,foundation Components,master Cylinder Recall | Oct 20, 1966

. Follwoing Is The Summary Of Corrective Actions Taken:
possibility That The Brake Master Cylinder Contains A Brittle Pushrod Retaining Ring.if This Ring Breaks, It Could Permit The Pushrod To Become Disengaged From The Master Cylinder, Rendering The Hydraulic Brake System Inoperative.(add Bumper Stop To Prevent Disengagement.)

This recall was issued on Oct 20, 1966 for 1966 Ford P100, manufactured by FORD MOTOR COMPANY, in response to Service Brakes, Hydraulic,foundation Components,master Cylinder problems.

1966 Ford F350 Recall |

1966 Ford F350 Service Brakes, Hydraulic,foundation Components,master Cylinder Recall | Oct 20, 1966

. Follwoing Is The Summary Of Corrective Actions Taken:
possibility That The Brake Master Cylinder Contains A Brittle Pushrod Retaining Ring.if This Ring Breaks, It Could Permit The Pushrod To Become Disengaged From The Master Cylinder, Rendering The Hydraulic Brake System Inoperative.(add Bumper Stop To Prevent Disengagement.)

This recall was issued on Oct 20, 1966 for 1966 Ford F350, manufactured by FORD MOTOR COMPANY, in response to Service Brakes, Hydraulic,foundation Components,master Cylinder problems.

1966 Ford F250 Recall |

1966 Ford F250 Service Brakes, Hydraulic,foundation Components,master Cylinder Recall | Oct 20, 1966

. Follwoing Is The Summary Of Corrective Actions Taken:
possibility That The Brake Master Cylinder Contains A Brittle Pushrod Retaining Ring.if This Ring Breaks, It Could Permit The Pushrod To Become Disengaged From The Master Cylinder, Rendering The Hydraulic Brake System Inoperative.(add Bumper Stop To Prevent Disengagement.)

This recall was issued on Oct 20, 1966 for 1966 Ford F250, manufactured by FORD MOTOR COMPANY, in response to Service Brakes, Hydraulic,foundation Components,master Cylinder problems.

1970 Ford Ford Truck Recall |

1970 Ford Ford Truck Service Brakes, Hydraulic,foundation Components,master Cylinder Recall | Nov 10, 1970

. Follwoing Is The Summary Of Corrective Actions Taken:
possibility That Cover On Dual Hy- Draulic Brake Master Cylinder Res- Ervoirmay Become Distorted Due To Excessive Tightening Of Attach- Ment Bolt.couldcause Brake Fluid To Leak From Under Cover, Resulting In Reduced Brakeefficiency.(cor- Rect By Replacing With New Im- Proved Type Cover.)

This recall was issued on Nov 10, 1970 for 1970 Ford Ford Truck, manufactured by FORD MOTOR COMPANY, in response to Service Brakes, Hydraulic,foundation Components,master Cylinder problems.

1985 Ford Thunderbird Recall | Brake Master Cylinders May Have Improperly Anodized Internal Surfaces Causing Accelerated Wear Of A Piston Seal.

1985 Ford Thunderbird Service Brakes, Hydraulic,foundation Components,master Cylinder Recall | Mar 11, 1985

Brake Master Cylinders May Have Improperly Anodized Internal Surfaces Causing Accelerated Wear Of A Piston Seal. Consequence Of Defect: One Portion Of The Split Brake System Would Become Ineffective Resulting In Increased Stopping Distance Which May Cause An Accident. Driver Would Be Warned By Increased Pedal Travel And The Brake Warning Light.. Follwoing Is The Summary Of Corrective Actions Taken: Master Cylinders Built On January 9, 1985 Will Be Replaced.
vehicle Description: Passenger Cars. System: Brake Master Cylinder.

This recall was issued on Mar 11, 1985 for 1985 Ford Thunderbird, manufactured by FORD MOTOR COMPANY, in response to Service Brakes, Hydraulic,foundation Components,master Cylinder problems.

1989 Ford Aerostar Recall | Inability To Maintain Pressure In The Secondary System Of The Master Cylinder (controls Braking Of Rear Wheels) Could Increase Brake Pedal Travel And Reduce Brake Performance At Temperatures Less Than 40 Degrees.

1989 Ford Aerostar Service Brakes, Hydraulic,foundation Components,master Cylinder Recall | Dec 11, 1989

Inability To Maintain Pressure In The Secondary System Of The Master Cylinder (controls Braking Of Rear Wheels) Could Increase Brake Pedal Travel And Reduce Brake Performance At Temperatures Less Than 40 Degrees.this Would Cause Reduced Braking Effectiveness Andincreased Stopping Distance That Could Result In A Crash Or Collision.. Follwoing Is The Summary Of Corrective Actions Taken: Install New Design Master Cylinder Incorporating A Redesigned Seal.
system: Brakes, Master Cylinder.vehicle Description: Truck, Van.

This recall was issued on Dec 11, 1989 for 1989 Ford Aerostar, manufactured by FORD MOTOR COMPANY, in response to Service Brakes, Hydraulic,foundation Components,master Cylinder problems.