1966 Ford Falcon Recall |

1966 Ford Falcon Suspension,front,wheel Bearing Recall | Oct 06, 1966

. Follwoing Is The Summary Of Corrective Actions Taken:
possibility That Front Wheel Bearing Retaining Nuts Were Over Torqued, Producing Insufficient Running Clearance For The Bearings.this Condition Can Lead To Noise, Vibration, ‘wheel Pull’, And, Ultimately, To Wheel Bearing Failure.(retorque To Level Specified.)

This recall was issued on Oct 06, 1966 for 1966 Ford Falcon, manufactured by FORD MOTOR COMPANY, in response to Suspension,front,wheel Bearing problems.

1966 Ford Ford Recall |

1966 Ford Ford Vehicle Speed Control Recall | Oct 18, 1966

. Follwoing Is The Summary Of Corrective Actions Taken:
under Certain Circumstances The Four Barrel Carburetor Secondary Throttle Plates May Stick In An Open Position When The Engine Is Not Fully Warmed Up.(replace Linkage Part Involved).

This recall was issued on Oct 18, 1966 for 1966 Ford Ford, manufactured by FORD MOTOR COMPANY, in response to Vehicle Speed Control problems.

1969 Ford F6000 Recall |

1969 Ford F6000 Suspension,front,wheel Bearing Recall | May 07, 1969

. Follwoing Is The Summary Of Corrective Actions Taken:
possibility That Incorrect Front Wheel Inner Bearings Were Used, Whicheventually Might Cause Failure Of Spindle.(correct By Inspecting Andreplacing When Necessary.)

This recall was issued on May 07, 1969 for 1969 Ford F6000, manufactured by FORD MOTOR COMPANY, in response to Suspension,front,wheel Bearing problems.

1969 Ford F600 Recall |

1969 Ford F600 Latches/locks/linkages,doors,latch Recall | May 07, 1969

. Follwoing Is The Summary Of Corrective Actions Taken:
possibility That Right Door And Cargo Door Latches May Have Improperly Madepart And, Under Certain Conditions, May Not Secure The Door Unless Locked Withkey Or Lock Button.(correct By Inspect- Ing And Replacing Door Latches Whennecessary.)

This recall was issued on May 07, 1969 for 1969 Ford F600, manufactured by FORD MOTOR COMPANY, in response to Latches/locks/linkages,doors,latch problems.

1987 Ford F150 Recall | Front Inner Wheel Bearings May Not Have Been Lubricated Adequately At Time Of Assembly.

1987 Ford F150 Suspension,front,wheel Bearing Recall | May 26, 1987

Front Inner Wheel Bearings May Not Have Been Lubricated Adequately At Time Of Assembly.if This Condition Were To Occur, Friction Will Causepremature Deterioration Of The Wheel Bearings And Steering Control Could Beaffected Adversely.. Follwoing Is The Summary Of Corrective Actions Taken: Inspect And Replace Any Bearing Or Race Showing Signs Of Galling Or Heat Spots.
system: Suspensionvehicle Description: F-150 Pickup Trucks.

This recall was issued on May 26, 1987 for 1987 Ford F150, manufactured by FORD MOTOR COMPANY, in response to Suspension,front,wheel Bearing problems.

1989 Ford Bronco Ii Recall | Front Wheel Bearing Adjusting Nut Retaining Keys May Be Missing From Front Axle Assemblies, Allowing The Nut To Loosen.

1989 Ford Bronco Ii Suspension,front,wheel Bearing Recall | July 05, 1989

Front Wheel Bearing Adjusting Nut Retaining Keys May Be Missing From Front Axle Assemblies, Allowing The Nut To Loosen.this Could Result In Detachment Of The Wheel And Hubassembly From The Axle, Loss Of Vehicle Control, And An Accident.. Follwoing Is The Summary Of Corrective Actions Taken: Install Retaining Keys In Front Wheel Hub Assemblies Where Missing.
system:front Wheel Bearing.vehicle Description:4×4 Multipurpose Vehicles Trucks Equipped With Front Axleautomatic Locking Hubs.

This recall was issued on July 05, 1989 for 1989 Ford Bronco Ii, manufactured by FORD MOTOR COMPANY, in response to Suspension,front,wheel Bearing problems.

1989 Ford Ranger Recall | Front Wheel Bearing Adjusting Nut Retaining Keys May Be Missing From Front Axle Assemblies, Allowing The Nut To Loosen.

1989 Ford Ranger Suspension,front,wheel Bearing Recall | July 05, 1989

Front Wheel Bearing Adjusting Nut Retaining Keys May Be Missing From Front Axle Assemblies, Allowing The Nut To Loosen.this Could Result In Detachment Of The Wheel And Hubassembly From The Axle, Loss Of Vehicle Control, And An Accident.. Follwoing Is The Summary Of Corrective Actions Taken: Install Retaining Keys In Front Wheel Hub Assemblies Where Missing.
system:front Wheel Bearing.vehicle Description:4×4 Multipurpose Vehicles Trucks Equipped With Front Axleautomatic Locking Hubs.

This recall was issued on July 05, 1989 for 1989 Ford Ranger, manufactured by FORD MOTOR COMPANY, in response to Suspension,front,wheel Bearing problems.

1998 Ford F800 Recall | Vehicle Description: Medium Duty Trucks And Chassis-cabs. An Automatic Locking Front Wheel Bearing Adjusting Nut Was Damaged During Installation Or Removal By Incorrect Tools Or An Incorrect Torque Specification Was Used.

1998 Ford F800 Suspension,front,wheel Bearing Recall | Feb 24, 1998

Vehicle Description: Medium Duty Trucks And Chassis-cabs. An Automatic Locking Front Wheel Bearing Adjusting Nut Was Damaged During Installation Or Removal By Incorrect Tools Or An Incorrect Torque Specification Was Used.this Condition Can Cause The Nut To Rotate Freely And Lose Torque. It Could Rotate Until It Is No Longer Connected To The Front Spindle And Allow The Front Wheel To Separate From The Vehicle.. Follwoing Is The Summary Of Corrective Actions Taken: Dealers Will Replace The Front Wheel Bearing Adjusting Nuts With Castle Nuts And Cotter Pins.
owner Notification Is Expected To Begin April 15, 1998.owners Who Take Their Vehicles To An Authorized Dealer On An Agreed Upon Service Date And Do Not Receive The Free Remedy Within A Reasonable Time Should Contact Ford At 1-800-392-3673.also Contact The National Highway Traffic Safety Administration’s Auto Safety Hotline At 1-888-dash-2-dot (1-888-327-4236).

This recall was issued on Feb 24, 1998 for 1998 Ford F800, manufactured by FORD MOTOR COMPANY, in response to Suspension,front,wheel Bearing problems.

1998 Ford F700 Recall | Vehicle Description: Medium Duty Trucks And Chassis-cabs. An Automatic Locking Front Wheel Bearing Adjusting Nut Was Damaged During Installation Or Removal By Incorrect Tools Or An Incorrect Torque Specification Was Used.

1998 Ford F700 Suspension,front,wheel Bearing Recall | Feb 24, 1998

Vehicle Description: Medium Duty Trucks And Chassis-cabs. An Automatic Locking Front Wheel Bearing Adjusting Nut Was Damaged During Installation Or Removal By Incorrect Tools Or An Incorrect Torque Specification Was Used.this Condition Can Cause The Nut To Rotate Freely And Lose Torque. It Could Rotate Until It Is No Longer Connected To The Front Spindle And Allow The Front Wheel To Separate From The Vehicle.. Follwoing Is The Summary Of Corrective Actions Taken: Dealers Will Replace The Front Wheel Bearing Adjusting Nuts With Castle Nuts And Cotter Pins.
owner Notification Is Expected To Begin April 15, 1998.owners Who Take Their Vehicles To An Authorized Dealer On An Agreed Upon Service Date And Do Not Receive The Free Remedy Within A Reasonable Time Should Contact Ford At 1-800-392-3673.also Contact The National Highway Traffic Safety Administration’s Auto Safety Hotline At 1-888-dash-2-dot (1-888-327-4236).

This recall was issued on Feb 24, 1998 for 1998 Ford F700, manufactured by FORD MOTOR COMPANY, in response to Suspension,front,wheel Bearing problems.